Parts & Accessories

The Drive Thru is a dummy hub or chain keeper that replaces your wheel while cleaning the chain. It is a fast and effective way to clean your chain between races or in your garage. It allows you to fully rotate your cranks and shift through your complete range of gears while protecting the frame. Installs simply with one hand, and is quick and easy to change between bikes. The Drive Thru is also great for packing the bike for transport. *This Drive Thru Value Meal includes three dummy axles with 1.0, 1.5 and 1.75 thread pitches and one pulley. - Value Meal includes 1.0, 1.5, and 1.75mm thread pitch dummy axles. - All Drive Thru dummy axles are 12mm in diameter. - Dummy axles are precision machined from 7075 aluminum and knurled for easy grip. - Pulleys are machined from durable Delrin. - Oil and solvent resistant O-rings - Lead-in threads designed for quick insertion into the frame - Simple, one-handed installation (no tools required)

- Wheel bearing kit front/rear - Bearing dimensions: 17 x 30 x 7mm - Material: steel - 2 pieces

- Grade 3 balls and magnetite rust proof finish - Abec 5 precision and silicone w seals - 3 times cryogenic race treatment - Bearings sold individually, not as pair

The Air-Liner Light is an ultra-fast and light-weight tire insert intended for the performance rider or anyone looking to improve the reliability and performance attributes of their ride. - The Air-liner Light lives by it’s namesake coming in at a scant 55g each and will go unnoticed to even the most finicky XC racer, with no loss in the benefits of using a liner - Improved grip at lower pressure with greater tire stability - Lowered risk of tire burping and the upside of run flat make this the leader in performance tire inserts

Replacement XD driver freehub body for Trail and Vantage 2-piece Ritchey hubs. - SRAM XD

These freehub bodies fit only the older Spoon hubs, not compatible with the new Oozy or Spike hubs.

Axle conversion kits are required for converting your current hub to be used on various other axle platforms. Fits Chris King R45D front hubs All axles require an adjusting clamp for installation, shown below PHB653 / PHB653B 100mm x 12mm Thru-axle

The Muc-Off Ultimate Tubeless Kit contains everything needed to get a tubeless-ready wheelset set up and ready to roll. Each Kit contains Tubeless Rim Tape, two CNC-machined black tubeless valves and two pouches of No Puncture Hassle Tubeless Sealant.

Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

Purchase our Kid Trailer axle for your bike. and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - This axle is specifically designed to fit the 142/148 hub standard Surly MDS or Gnot Boost bikes. - The derailleur end of our axle is internally threaded and will use the bolt from your stock Surly axle. The disc brake side of our axle has an engineered mount for your trailer hitch. That mount has been permanently attached to the axle. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. The threads are M10x1 (metric). - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

Shimano, FH-M828/788/678/648, Freehub body, Y3TH98050

Adjusting clamp for R45 and R45D hubs. PHB735, PHB735B (R45D Centerlock Rear)

Who knew we could make a thru axle disappear? The new Maxle Stealth offers a light, low profile alternative to Maxle Lite. - Hub OLD 20x110 - Length 158mm - Thread Length 10mm - Thread Pitch M20x1.50 - BoXXer C1 (2019+) - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench - Compatible with all 15mm forks

Shimano Dura-Ace 9000 Hub Quick Release Skewer. - Axle Type: Standard QR

Chris King made-in-house bearings are designed to last a lifetime and are fully serviceable. We encourage you to service your bearings before resorting to replacement.

Chris King Driveshells contain two of our legendary made-in-house bearings, a machined bearing spacer spring to aid in preloading the bearings and a spacer spring o-ring. We encourage you to service your bearings before resorting to replacement. Driveshell Inner Bearings require an R45 or Universal Hub Tool to remove and reinstall.

Chris King Driveshells contain two of our legendary made-in-house bearings, a machined bearing spacer spring to aid in preloading the bearings and a spacer spring o-ring. We encourage you to service your bearings before resorting to replacement. Driveshell Inner Bearings require an R45 or Universal Hub Tool to remove and reinstall.

Axle conversion kits are required for converting your current hub to be used on various other axle platforms. PHB717, PHB717B 100mm x 9mm R45 QR front axle—Silver or Black

Chris King made-in-house bearings are designed to last a lifetime and are fully serviceable. We encourage you to service your bearings before resorting to replacement. -Steel Bearing

- End caps for Origin8 FB-1100 fat bike hubs

End cap for Origin8 MT-3200 hubs - Rear axle - Supplier Part: KT-M4TR - Size: 12TA - Spacing / Axle: 148mm

Replacement Cassette body for Origin8 hubs - Use: 8-10s Cass

Replacement Cassette body for Origin8 hubs - Compatibility: #371359 / 370935 / 370936 / 391360 / 370930 / 370931 / 370979 - Use: 12s XD

- Replacement Cassette body for Origin8 hubs

- Replacement QR axles for Origin8 RD-1100 hubs

- End cap adapters for Origin8 RD1120 series 11-speed road hubs

Replacement freehub body for Vantage and Trail non 2-piece V2 Ritchey hubs. - Shimano Mountain 10-speed

Maxle Ultimate Lever Assembly - Fits Maxle Ultimate B1 - Includes lever section only - Suitable for suspension forks

The buyer's choice for wheel builders looking to save weight. ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond. - Weight: starting at 20g for 64 nipples

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.