Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction
- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains
• Designed to keep dust and dirt out of V-Brake cable/housing systems
$1.50 - $2.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
Stainless steel pedal washers - Sold in pairs
- Aluminum w/lock nut - 18mm long/6mm O.D.
- Aluminum w/lock nut and mount - Slotted mount design
- Crown Race - Size: 27.0mm
- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame
Replacement bearing for the lower half of YST8003 #7 headset.
Replace the top bearing in your YST8300 headset with these caged ball bearings.
- Type: Lock washer - Size: 1" Keyed
- Routes cables underneath the bottom bracket - Will not rust or corrode
- w/Nut - 1-3/4-inch
- 8x1mm Allen head
- Model: Replacement bolt - Compatibility: Allen, M5x16
M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever
- Replacement retaining clip for the Surly Tuggnut/Snuggnut
Replacement M5 x 10 Socket Head Screw fastener for derailleur hangers. - Head Type: Socket Head Cap - Drive Type: Hex Socket - Thread Size: M5x0.8mm - Length Under Head: 10mm - Material: Stainless Steel - Hex Key Size: 4mm - Bag of 5
The Gyro G3 upper top plate is designed for use with the G3 detangler.
$2.65 - $3.50
Replacement M5 x 8 Flat Head Screw fastener for derailleur hangers. - Thread: M5-0.8 - Overall Length: 8mm - Material: Steel - Use with 3mm hex wrench - Bag of 5
Replacement M3 x 10 Socket Head Screw fastener for derailleur hangers. - Thread: M3-0.5 - Thread length: 10mm - Use with 2.5mm hex wrench - Bag of 5
Replacement M8 Nut/Bolt Set for Wheels Mfg derailleur hangers. - M8 chainring bolt style fastener - Use with 5mm hex wrench
Product details - Use in chainstay pocket to seal sensor into frame
- Replacement cable anchor bolt for brakes - Includes nut and washer
- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front
Page 1 of 38 Next page