Filter By:
- Parts & Accessories (14)
- Combos/Systems (5)
- Headlights (14)
- Taillights (8)
NiteRider Bicycle Lighting
$4.99
The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
- TL 5.0 SL
$7.99
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
- TL 5.0 SL
Not compatible with omega 300 and sentry aero 260 tail lights.
$9.99
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
$9.99
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended.
System Compatibility:
- Lumina Series
- Mako Series
- MiNewt Cordless Series
$9.99
If you're looking to mount your NiteRider PRO series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment.
SYSTEM COMPATIBILITY
- PRO Series
Not compatible with Lumina Pro lighting systems
$9.99
If you're looking to mount your Lumina and Mako series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment.
System Compatibility
- Lumina Series
- Mako Series
$9.99
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
- TL 5.0 SL
$12.99
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm.
SYSTEM COMPATIBILITY
- Lumina Series
- MiNewt Cordless Series
- Mako Series
WARRANTY
- This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)
$12.99
The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash.
Features
- Lumen Output: 25
- 4 Modes with a Run Time up to 60h
- 2 x AAA Alkaline Battery Powered
- Weight: 70g
- Battery: 2 x AAA Alkaline
- Increased safety with 210° of Visibility
- Budget Friendly Rear Lighting System
- 25 Lumen taillight with Eye Catching Flash Patterns
- Water / Dust Resistant IP64 Rated
Run Time
- Up to 60h
$14.99
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns.
System Compatibility:
- Lumina Series
- MiNewt Mini Series
- Mako Series
$14.99
The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light!
System Compatibility
- Lumina Series
- MiNewt Mini Series
- Mako Series
$19.99
Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights.
System Compatibility
- Pro Series
- HID Series
- Classic Plus & Select
- Evolution & Digital Evolution
- HeadTrip & Digital HeadTrip
- TrailRat & TrailRat Select
- RoadRat
- Digital Patrol LED
- Digital Patrol
- Pre 2001 systems
$24.99
To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options.
Features
- Lumen Output: 100
- 4 Modes with a Run Time up to 136h
- 2 x AAA Alkaline Battery Powered
- Weight: 82g
- Battery: 2 x AAA Alkaline
- Highly Visible up to 1 Mile
- 100 Lumen Daylight Visible taillight
- Water / Dust Resistant IP64 Rated
Run Time
- Fast Flash—96:00h
- Pulse Flash—136:00h
- Steady High—72:00h
- Steady Low—127:00h
$24.99
NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the "entry level" commuter lights are nothing more than "be seen" lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers three models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. A favorite feature is the side "gills" that emits light, it not only looks cool, but makes the Makos more visible. The Mako line is easy on the wallet and easy to operate.
- Side lights
- Economical, high output light
- Super bright flash setting ideal for daylight use
- Easy operation battery operated (comes with 2 x AA)
- 3 light settings – High, Low and Flash
- Lumen Output: 150
- Run Time: 18:00 – 72:00hrs
- Weight: 175g
- Battery: Alkaline AA x 2
WARRANTY
The Mako 150 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components
(housings, covers, mounts and fasteners) and LEDs.
SYSTEM INCLUDES
- LED Light Head
- Handlebar Mount
- 2 AA Alkaline Batteries
$29.99
NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the "entry level" commuter lights are nothing more than "be seen" lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers three models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. A favorite feature is the side "gills" that emits light, it not only looks cool, but makes the Makos more visible. The Mako line is easy on the wallet and easy to operate.
- Side lights
- Economical, high output light
- Super bright flash setting ideal for daylight use
- Easy operation battery operated (comes with 2 x AA)
- 3 light settings – High, Low and Flash
- Lumen Output: 200
- Run Time: 15:00 – 60:00hrs
- Weight: 175g
- Battery: Alkaline AA x 2
WARRANTY
The Mako 200 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components
(housings, covers, mounts and fasteners) and LEDs.
SYSTEM INCLUDES
- LED Light Head
- Handlebar Mount
- 2 AA Alkaline Batteries
$29.99
The NiteLink remote allows the rider to pair and simultaneously power on/off the Lumina Max headlight and Omega EVO 300 taillight wirelessly.
- All New design equipped with NiteLink Wireless Technology
- Lights sold separately
$29.99
AC adapter for NiteRider Pro 2200 Race, Pro 1800 Race, Pro 1200 Race, MiNewt Pro 770 Enduro, MiNewt Pro 750, TriNewt, TriNewt Wireless and all MiNewt Series bike lighting systems.
Please note: Style and color may vary
SYSTEM COMPATIBILITY
- Pro 2200 Race
- Pro 1800 Race
- Pro 1400 Race
- Pro 1200 Race
- MiNewt Pro 770 Enduro
- MiNewt Pro 750
- TriNewt
- TriNewt Wireless
- MiNewt Series
$29.99
The NiteRider Sabre 110 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye-catching visibility in both day and night.
Features
- Lumen Output: 110
- 6 Modes with Run Times: 1:45 – 17:00hrs
- Charge Time: 2:30hrs
- Weight: 28g
- Battery: Li-Po
- Low Battery Indicator
- 110 Lumen Super Lightweight Daylight Visible taillight
- Water / Dust Resistant IP64 Rated
Run Times
- Pulse Flash—7:00h
- Flash—6:00h
- Fast Flash—17:00h
- Steady High—1:45h
- Steady Med—4:00h
- Steady Low—8:30h
$29.99
The NiteRider Swift 300 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it's USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts.
Although small in size, make no mistake; the Swift 300 packs a big punch with a maximum light output of 300 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 300 can run for up to twenty-seven hours before it needs a charge.
- Highly durable design made with fiberglass reinforced plastic
- Smooth 300 lumen beam pattern in an ultra compact and lightweight design
- Innovative Collimator Lens – optimizes your field of view
- Built-in, easy on and off handlebar strap mount
- 4 Light Levels plus 1 Daylight Flash Mode
- Fuel Gauge / Battery Level Indicator
- FL1 Standard IP64, dust and water-resistant
- Convenient USB rechargeable
WARRANTY
- The Swift 300 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs.
SYSTEM INCLUDES
- LED Light Head
- Internal Li-Ion Battery
- Build-in, Handlebar Mount
- USB Charging Cable
$29.99
Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm.
System Compatibility:
- Pro Series
- HID Series
- Classic Plus & Select
- Evolution & Digital Evolution
- HeadTrip & Digital HeadTrip
- TrailRat & TrailRat Select
- RoadRat
- Digital Patrol LED
- Digital Patrol
- Pre 2001 systems
$34.99
The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. Our favorite feature is the side "gills" that emits light, it not only looks cool but makes the Makos more visible. The Mako line is easy on the wallet and easy to operate.
The TL 6.0 has five ultra-bright LEDs with four different operating modes, including three different flash modes. The amber Side Lights help to provide even more visibility from the sides of the rider. The TL 6.0 will help keep you safe and seen from behind (180-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash.
Mako 200
- Side lights
- Economical, high output light
- Super bright flash setting ideal for daylight use
- Easy operation battery operated (comes with 2 x AA)
- Run Times: 15:00 – 60:00 hours
- 3 light settings—High, Low, and Flash
- Water / Dust Resistant IP64 Rated
TL 6.0
- 5 Ultra Bright LEDs
- Up to 60 hours run time
- Cost-effective, high-quality light
- Super bright day time flash mode
- 3 operating modes
- Runs on AAA batteries
- Water / Dust Resistant IP64 Rated
$34.99
NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the “entry level” commuter lights are nothing more than “be seen” lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. The Mako line is easy on the wallet and easy to operate.
- Low cost, high powered light
- Highly visible in traffic = keeps you safe
- 3 light settings – High, Low and flash
- Tough durable design
- Lumen Output: 250
- Run Time: 12:30 – 28:00hrs
- Weight: 175g
- Battery: Alkaline AA x 2
WARRANTY
The Mako 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components
(housings, covers, mounts and fasteners) and LEDs.
SYSTEM INCLUDES
- LED Light Head
- Handlebar Mount
- 2 AA Alkaline Batteries
$39.99
The NiteRider Swift 500 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it's USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts.
Although small in size, make no mistake; the Swift 500 packs a big punch with a maximum light output of 500 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 500 can run for up to twenty-five hours before it needs a charge.
- Highly durable design made with fiberglass reinforced plastic
- Smooth 500 lumen beam pattern in an ultra compact and lightweight design
- Innovative Collimator Lens – optimizes your field of view
- Built-in, easy on and off handlebar strap mount
- 4 Light Levels plus 1 Daylight Flash Mode
- Fuel Gauge / Battery Level Indicator
- FL1 Standard IP64, dust and water-resistant
- Convenient USB rechargeable
WARRANTY
- The Swift 500 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs.
SYSTEM INCLUDES
- LED Light Head
- Internal Li-Ion Battery
- Build-in, Handlebar Mount
- USB Charging Cable
$39.99
Vmax+ 150 is NiteRider’s first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light—easily clipping onto straps, belt loops, and more! For added convenience, the Vmax+ 150 features mode memory, will power ON in the last mode used.
- 6 Modes with Run Times: 4:30-25:30h
- Lumen Output: 150
- Charge Time: 2:00h
- Water / Dust Resistant IP64 Rated
- USB-C Rechargeable
- Mode Memory (Powers ON in last mode used)
$44.99
We understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the "entry level" commuter lights are nothing more than "be seen" lights. Your overall safety and visibility should not be limited by your budget, and that's why we created the Mako Series. The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen but allowing the cyclist to see as well. The Mako line is easy on the wallet and easy to operate.
For much of night riding, the key to survival is not only seeing but also being seen, the CherryBomb 100 addresses the latter. By incorporating a unique multi-directional collimator specifically designed for cycling, the CherryBomb 100 maximizes visibility by dispersing light to the sides of the rider as well as to the rear, effectively eliminating blind spots to upcoming automobiles. To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector which allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included, for flexible mounting options.
Mako 250
- Low cost, high powered light
- Highly visible in traffic = keeps you safe
- Run Time: 7:00 – 28:00 hours
- 3 light settings—High, Low, and Flash
- Tough durable design
- Water / Dust Resistant IP64 Rated
CherryBomb 100
- Daylight Visible Flash (DVF)
- Up to 136 hour run time
- Visible up to 1 mile
- Internal reflector = visible if light in off mode
- Easy to operate AAA batteries
- Super bright day time flash mode
- Be Seen by cars = Be Safe
- Water / Dust Resistant IP64 Rated
$44.99
The NiteRider Sentry Aero 260 is a lightweight, aero taillight featuring dual LED light strips to deliver 260 lumens of Daylight Visible red light. An inner and outer lens design helps to shape light output, producing long-range visibility when viewed directly from the rear, but also providing ample surrounding light to the peripheral, making the Sentry Aero 260 visible from nearly any angle.
- Daylight Visible Flash (DVF)
- 260 lumen super bright tail light
- Group Ride Mode – be seen without distracting fellow cyclists
- Easy on and off Aero seat post strap mount with quick release tab
- Aero seat post strap included
- Convenient USB rechargeable
- Super bright Daylight Visible Flash mode
- Innovative Aero shape with excellent side visibility
- FL1 Standard IP64, dust and water-resistant
WARRANTY
- The Sentry Aero 260 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs.
SYSTEM INCLUDES
- LED Tail Light
- Seat post Mount
- USB Cable
$54.99
Emax+ 150 is NiteRider's first taillight specifically made for electric bikes. It comes with a power line that's pre-wired for connection to the eBike's battery. Power line cable measures approximately 52" in length. Taillight powers ON with ignition/ power switch. Features six modes-Steady ON and varying flashes-with Built-in Mode Memory (remembers last setting).
FEATURES
- Lumen Output: 150
- 6 Modes
- Hardwired, Voltage 6 to 80 Volts DC
- Water / Dust Resistant IP64 Rated
- Weight: 75 grams
- Fits 22mm-34.9mm seat posts
- Includes a pre-wired Emax+ 150 Taillight, Seat Post Clamp Mount, Rubber Mounting Shims, and Rack Mount
LIGHT MODES
1) Fast Flash
2) Slow Flash
3) Disco Flash
4) Pulse Flash
5) High Steady
6) Low Steady
NiteRider recommends this taillight be installed by an authorized e-bike service and repair shop.
$59.99
Big things come in small packages and the NiteRider Lumina Micro 650 is the proof. The Lumina Micro 650 delivers a powerful punch with 650 lumens of light output, helping you to safely navigate your ride. Allowing you to see and be seen.
As with all Luminas in the series, it features a low battery indicator – when the power button changes from blue to red color this indicates that there is approximately 15-20% battery life remaining.
- All New Collimator Lens, produces a generous even widespread beam
- Daylight Visible 650 lumen output head light
- CREE LED at 6000k
- Ride safely with Daylight Flash Mode!
- 4 Light Levels plus 1 Daylight Flash Mode
- FL1 Standard IP64, dust and water-resistant
- Secure on and off-road capable Handlebar Mount
- Fits standard and oversize 35mm handlebars
- Compact and lightweight design that's perfect for helmet mounting (Helmet Mount Sold Separately)
- Convenient USB rechargeable
- Low battery indicator
- Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light.
WARRANTY
- The Lumina Micro 650 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs.
SYSTEM INCLUDES
- LED Light Head
- Internal Li-Ion Battery
- Handlebar Mount fits up to 35mm
- USB Charging Cable
$59.99
The NiteRider Sentinel 250 is designed to increase cycling safety by way of 2 varying flash patterns and 2 steady beams (High/Group Ride Mode). Behind the durable red lens and casing are two powerful LEDs that emit 250 lumens in the brightest Daylight Visible Flash setting, allowing you to be seen day or night. For enhanced safety, the Laser Lane modes (3) are designed to project ultra-bright laser lines on the ground. This creates a virtual lane for the rider, further increasing visibility.
- The Sentinel 250 complies with FDA standard for lasers, notice No. 50, 2007
- Daylight Visible Flash (DVF)
- Highly visible laser lanes
- All in one, Laser and tail light!
- Convenient USB rechargeable
- Group Ride Mode – be seen without distracting fellow cyclists
- Easy on and off seat post strap mount with quick release tab
- FL1 Standard IP64, dust and water-resistant
WARRANTY
- The Sentinel 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components
(housings, covers, mounts and fasteners) and LEDs.
SYSTEM INCLUDES
- LED Tail Light w/ Laser Lanes
- Seat post Mount
- USB Cable
$59.99
The Swift 300 gives you more than enough lumens at our lightest weight for headlights (82 grams). NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. The Swift 300 features a highly durable light housing with Dupont Fiberglass reinforced nylon meeting all required FL1 Standards for impact testing and water / dust resistance.
Vmax+ 150 is NiteRider's first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light-easily clipping onto straps, belt loops, and more.
SWIFT 300 FRONT LIGHT FEATURES
- Lumen Output: 300
- 5 Modes with Run Times: 2:00 – 28:00h
- Charge Time: 2:00h at greater than 500mA | 3:15h at 500mA
- Water / Dust Resistant IP64 Rated
- USB Rechargeable
SWIFT 300 TYPICAL RUN TIMES
Low—15:00h at 80 Lumens
Med—9:00h at 150 Lumens
High—2:00h at 300 Lumens
Flash—12:00h at 300 Lumens
Walk—28:00h at 20 Lumens
Vmax+ 150 TAILLIGHT FEATURES
- Lumen Output: 150
- 6 Modes with Run Times: 5:30-27:30h
- Charge Time: 2:00h
- Water / Dust Resistant IP64 Rated
- USB-C Rechargeable
Vmax+ 150 TYPICAL RUN TIMES
Fast Flash—12:45h
Slow Flash—10:15h
Disco Flash—10:45h
Pulse Flash—7:00h
High Steady—5:00h
Low Steady—27:00h
Page 1 of 2
Next page