Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories
$22.50
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
$22.99
Add an Alfine hub, cog, spokes, and a rim to this Shimano Internally Geared Hub Small Parts Kit, and you're ready to rock.
- Alfine hubs are packaged without small parts and require this kit plus a cog
- Nexus hubs are packaged with small parts and cogs and do not require an additional small parts kit
- For 11-Speed Hub
- Includes CJ-S700 Cassette Joint for Vertical Dropouts
*Cassette joint does not fit Di2 Alfine hubs
$22.99
Adapts HEX 32 J-Type F15/20 Front Hubs to 12x100.
Compatible with:
- HEX J-Type 32H non-Boost Front Wheels
Not compatible with:
- HEX 28 Straightpull or HEX Gravel Front Hubs
- HEX Straightpull or Gravel Front Wheels. (see HEX 28 front hub adapters)
- SPIKE/OOZY/SPOON hubs
$22.99
- Supplies full wheel illumination for 700c/29in wheels and smaller
- Approximately 40 hrs of battery life
- Water resistant design
- Includes 3 (AA) batteries
- Sold individually (1 wheel)
- Easy to install
$23.00
- Kits include one pair of end caps
- Instructions and hub axle determinations are available online @ www.notubes.com
$23.00
- Kits include one pair of end caps
- Instructions and hub axle determinations are available online @ www.notubes.com
$23.99 - $52.79
Ease of use, lightweight, and optimum performance in a single product.
The DT Pro Head shape, combined with both a torx and a square tool interface, makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. All-brass nipples are recommended for e-bike use. Weight: starting at 26g for 64 nipples.
$23.99
Protect your tubes without adding bulk with these Rim Strips from FSA. They're lightweight, and come in different lengths according to wheel size. Peace-of-mind comes standard.
$23.99
The Supreme hub guards can simply and easily replace the cones on your supreme front and cassette hubs for a perfect fit without having to spread your dropouts. These guards feature a heat-treated chromoly insert for longer life.
- Designed to fit perfectly on We The People Supreme hubs
$24.00
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
$24.00
Zipp 101 XPLR MOTO Rim Strip And Tubeless Tape Kit (includes rim strip and tubeless tape for 1 wheel).
$24.40
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.
$24.95
Conversion kits and caps sets compatible with Ritchey front hubs.
- For any Ritchey 15mm front thru-axle hub
- Replacement endcap for Phantom Flange front hubs
- Converts from 15mm TA to 9mm QR
$24.95
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.
- Presta
- 34mm
$24.95
Boostinators are hub specific conversions designed to take non-boost hubs and convert them to boost compatibility. Don't toss out that wheelset - Boostinate it.
$24.99
Booster thru-axle hub spacer kits are designed to give your non-Boost front and rear thru-axle hubs the boost they need to fit any Boost-compatible frame or fork. Kit includes Center Lock Adaptor, allowing riders to use 6-bolt rotors on Shimano Center Lock compatible hubs.
- 10mm spacer kit adapts 100 x 15mm front hub to 110 x 15mm
- Includes 10mm adapter to 6-bolt rotors
- Includes external spline lock ring for thru-axle compatibility
$24.99
Booster thru-axle hub spacer kits are designed to give your non-Boost front and rear thru-axle hubs the boost they need to fit any Boost-compatible frame or fork. Kit includes Center Lock Adaptor, allowing riders to use 6-bolt rotors on Shimano Center Lock compatible hubs.
- 6mm spacer kit adapts 142 x 12mm rear hub to 148 x 12mm
- Includes 6mm adapter to 6-bolt rotors
- Includes external spline lock ring for thru-axle compatibility
$25.00
- Colored rim decal kits to personalize your ride
- Decals to fit 2 100w 26-inch rims
$25.00
- Colored rim decal kits to personalize your ride
- Decals to fit two (2) 50w 27.5+ rims
$25.00
- Colored rim decal kits to personalize your ride
- Decals to fit two (2) 70w 26-inch rims
$25.80
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.
$25.95
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.
- Presta
- 46mm