RockShox

Strain relief for servicing RockShox Reverb hydraulic lines. - Fits all generations of Reverb

A new stet of post keys for your RockShox Reverb tightens up any rotational slop that may develop normally with use. - Fits all generations of Reverb and Reverb Stealth - Brass Key sizes are defined by the number of lines on the key. (Zero lines means a "Size 0" key, 3 lines means a "Size 3" key.)

Dirty, worn, or damaged Foam Ring Filters can lead to premature wear and damage to your Reverb's internals. Keep that post dropping smoothly and reliably by replacing foam rings at regular service intervals. - Fits all generations of Reverb - Keeps lubrication on the inner shaft assembly

Recommended by RockShox for shock rebuilds. • Rear shock seals lubricant • 2g tube

Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.

RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.

RockShox's Schrader Valve Removal Tool is an essential tool for working on suspension components. This shop quality tool makes removing Schrader valve cores easy with its long, comfortable handle.

RockShox's Reverb Cable/Hose Line Guides are a great way to route dropper posts on frames without integrated guides. They secure with a zip tie, and feature a wide mouth that allows for cable articulation as you drop and raise your post.

This is RockShox's recommended cleaner for suspension internals. Handy aerosol spray degreases and conditions small parts like O-rings and seals. - Formulated with special conditioners that will not cause O-rings and seals to dry, crack, or degrade - For use on all suspension products

• Essential mechanic tool to properly service and maintain all RockShox products • For RockShox Monarch

RockShox Reverb Hose Parts

Replacement Remote-end Hose Barb for RockShox Reverb dropper seatposts. - Fits all generations of Reverb

• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus

• RockShox Dynamic Seal Grease (PTFE) • Recommended for rear shock service

RockShox Reverb External Parts include clamp nuts, bolts only

RockShox Reverb/Reverb Stealth IFP (Upgrade For A1 and A2 post)

- Steel studs for most RockShox fork models that accept cantilever brakes - Sold as pair

RockShox Reverb Internals - Use with A1 upper assembly and A1 remote only

RockShox Reverb Internals - Use with A2 upper assembly and A2 remote only

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

• Removes and installs all RockShox 1/2mm rear shock eyelet bushings and mounting hardware

RockShox Reverb External Parts include upper/lower clamp plates only

Air Valve Assembly for RockShox Reverb Stealth dropper seatposts. - Contains air stem, valve, o-rings, and cap - For "A1" (2010-2012) and "A2" (2013-2016) designated Reverb Stealth Posts - A1 posts have a silver return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle - A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle

RockShox's Headset Spacer Set is a perfect compliment to your RockShox fork. These lightweight 1 1/8-inch headset spacers feature a carbon finish with stylish RockShox logos. You get two 5mm spacers, one 10mm, and one 15mm.

- Slides over upper fork legs to prevent frame/fork contact - Works on 35mm boXXers only

In the heat of enduro racing, you might not want your Reverb dropper post to drop to the lowest setting. To keep you from limiting yourself, RockShox created the Reverb Enduro Height Collar. This machined aluminum collar clamps to the Reverb seatpost to limit your post's travel from reaching its full potential. It features a hinged clamp for easy installation and removal.

This is a Connectamajig hose kit for replacing your Reverb's hydraulic line. - Fits all generations of Reverb Stealth - Includes Connectamajig, new hose, new strain relief, new barb - 2000mm hose

RockShox's PM600 Military grease is great for suspension rebuilds. It delivers excellent shock feel, and keeps your gear running at its best. • Used as an assembly lubricant for dust seals, rebound dampers, spring top caps, air springs, and compression damper top caps • 500+ degrees melting point • Soluble in suspension fluid

Remote-mounted Return Speed Adjuster rebuild kit for A2 generation Reverb and Reverb Stealth Posts. - Barbs, O-Rings, and Return Speed Adjuster - For "A2" designated posts, 2013-2016 - A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle

The Maxle Stealth offers a light, low profile, tooled alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench