Ritchey Bicycle Components

With a classic 25.4mm clamp diameter, the extra-tall 30mm of rise gives way to comfort and added control for an economic option for any classic mountain bike build. - Material: 6061 alloy - Width: 670mm - Rise: 30mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 25.4mm - Bar-end compatible: yes - Weight: 399g

Sleek design and ultimate functionality of the WCS 1-Bolt seatpost are the hallmarks of Ritchey design. Single bolt-actuated side load clamp offers easy adjustability and simple security in a post that works as nicely as it looks. - 3D Forged 7050 Alloy - Available in 27.2, 30.9 and 31.6mm diameters - Available in 350 and 400mm lengths - 20mm Offset - 7x7mm saddle rail clamp included - Interchangeable clamps available for carbon rail saddles - Saddle Clamp Torque Spec: 12Nm - Finish: Blatte - 195g (27.2/350)

Ritchey's Liquid Torque creates extra friction between 2 surfaces, reducing tightening torque required to avoid slippage. - Creates extra friction between two surfaces, allowing tightening torque to be reduced by up to 30% - Particularly useful when over-clamping can damage sensitive components such as carbon bars or steerer tubes - Approved for use with carbon, steel, alloy and titanium surfaces - Use with Ritchey Torqkey to ensure safe installation of Ritchey bars and stems

When stiffness and weight are the top on your list, you want Ritchey's SuperLogic C-260 Carbon Stem. This revolutionary design starts with a bar clamp that wraps a full 260-degrees around the handlebar to distribute clamping stress evenly through the handlebar, faceplate, hardware and stem body. Ritchey's first full-carbon stem, the C-260 features high-modulus carbon for stellar strength-to-weight ratio that translates into a solid but forgiving ride. And, the steer tube clamp uses three bolts and a curved slot to reduce clamp stress on the steer tube, so you can run carbon bars and a carbon steerer with no problem.

The smartest, most convenient torque key now comes with enough bits to suit every need. Make sure those stem bolts are tight enough, and double check the torque on the seatpost bolt while you're at it. The Ritchey Bicycle Torque Key is an essential tool for those important bolts. Available with 4 or 5Nm options, this 6-bit set includes just about every bit you'll need for your bike, and a convenient holder to keep it all organized. - Hex 3/4/5mm - Torx T-20/25 - Phillips #1 - 4 or 5Nm max torque - Bit holder included

The WCS C220 stem is easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. - The handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar - Bolt forces are aligned with the clamp so that the stem body embraces the handlebar which is less prone to damaging lightweight bars - Clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness

The redesigned Zero post offers no-slip saddle engagement and high adjustability by securing the rails with fore and aft bolts. Whether you're hitting rough singletrack or remounting in a hurry, this ensures the saddle stays exactly where you want it. - Material: 2014 alloy - Total length: 400mm (including 100mm of minimum insert) - Saddle clamp: 2-bolt fore/aft - Saddle clamp torque: 7Nm (max) - Seat collar torque: not specified - follow frame/seat binder specification - Weight: 240g (27.2x400mm)

For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the WCS Drop In Integrated Headset stands above all others. This carbon fiber beauty features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. - Top cap: 8.3mm - Material: Alloy - Upper Fit (S.H.I.S.): IS42/28.6 - Upper Bearing OD: 41.8 - Top Cover OD: 46mm - Bearing: Sealed cartridge, Ti-coated - Weight: 36g

A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)

The Ritchey two-bolt post, reinvented. It's now lighter, more compliant, and more versatile than ever. Patented LINK clamp works with all standard saddle rail designs as well as Ritchey Vector Evo and Selle Italia MonoLink saddles with separate adapter. LINK Carbon Posts use FlexLogic carbon layup developed for Pro Tour team bikes from Stevens, Canyon, and Scott and is 15% more vertically compliant with no loss of lateral or torsional stiffness. 15mm of offset and a reversible clamp allows for an additional 10mm of fore/aft saddle adjustment. - Monocoque Carbon Construction - Offset: 15mm - Reversible clamp allows for an additional 10mm of fore-aft saddle adjustment - Matte UD finish - 181g (27.2x300)

You really can have it all-the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. - Material: 3D forged 7075, carbon encased body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Stack: 42mm - Steerer: 1-1/8" - Faceplate Width: 42mm - Matte UD carbon finish - 126g (110mm)

Designed specifically for the Ritchey WCS Carbon Fork, this compression device secures the stem and headset for any fork with a carbon steerer. - Compression plug for carbon 1-1/8" steerers - Top cap fits 1-1/8" stems

- Bar Clamp Diameter: 31.8mm - Material: Alloy - Stem Angle: +17 degrees, -17 degrees - S.H.I.S. Stem Clamp Diameter: 31.8mm

For riders looking for the perfect fit or a little more comfort miles into a gravel ride, the ErgoMax features an anatomical shallow drop mated with 25mm of rise for an unsurpassed ride quality - Bar Clamp Diameter: 31.8mm - Bar Drop: 128mm - Bar Reach: 73mm - Bar Top Style: Round - Accessory Mount Diameter: 31.8 - Drop Bend Style: Compact - Cable Routing: External - Material: Aluminum - Clip-on Compatible: Yes - Flare: 4.6

Ritchey Front Hub Conversion Kits

The new 2X Trail bar is two bars in one: select 5mm of rise or drop while maintaining a 9-degree sweep. Great for 29ers and other bikes with tall front ends. - Material: triple-butted 7050 alloy - Width: 720 and 760mm - Rise: reversible +/- 5mm flat rise - Backsweep: 9° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 232g

- C-220 degree extra-wide bar clamp improves stiffness and fits most riser bars - 3D forged 6061 alloy - 42mm steerer height with 41mm faceplate width - 142g (90mm)

Authentic Ritchey hub conversion kit for mountain bike hubs. - Convert 15mm (OD) alloy axle to QR9 ID - Quick release skewer not included

The ergonomic evolution of Ritchey handlebars continues with the ground-breaking WCS Beacon. The most notable feature is its super-wide 36° drop flare. Aside from the unmatched ergonomic comfort and stability afforded by this wide flare, it also allows for plenty of space for handlebar packs. When riding in the drops, the Beacon doubles down on comfort with a very shallow 80mm drop and a shorter-than-usual reach. The Evo-style top section offers broad support for your hands, and it has a gentle backward sweep for a more natural hand position when riding the tops. The unconventional aesthetic of the WCS Beacon belies its comfort and practicality. Taking inspiration from the randonneur world, the Beacon allows an easy transition of the hands around the bar without upsetting bike handling when loaded with gear. The gentle change of hand position allows the body to stretch and move while keeping the bike stable. Ideal for adventure touring and bikepacking on asphalt or gravel trails—or even for urban riding—the unique WCS Beacon brings a whole new level of comfort and control. - Material: triple-butted 7050 alloy - Bend style: bio-bend - Top style: ergonomic - Drop: 80mm - Reach: 65mm - Drop flare: 36° - Flare out: 6° - Backsweep: 4.5° - Clamp diameter: 31.8mm - Accessory mount diameter: 31.8mm - Compatible with Shimano EW-RS910 junction box - Clip-on compatibility: yes - Other features: drilled at bar end for Shimano Di2 EW-RS910 junction box routing, C260 compatible - Weight: 270g (42cm)

Tom Ritchey has been riding off-road and riding far—and designing products for such adventures—decades before anyone thought to call it "gravel riding" or "bikepacking." His real-life experiences directly inform every product made by Ritchey—such as the beloved VentureMax handlebar. With its short reach, shallow drop, and purposeful flare, the original VentureMax offers comfort and confidence to legions of riders looking to settle in and have some fun on those dirty drop bar adventures. Bikepacking adventures demand components that deliver unmatched comfort, practical features, and logical design. Taking the idea of the original Comp VentureMax to the next level, or rather width, the Comp VentureMax XL features all of the goodness of the original bar but widens it way up to a full 52cm. Appealing especially to the bikepacking community, the Comp VentureMax XL offers ergonomic tops for a more comfortable hand position, and the wider grip ensures more off-road control and stability when fully-loaded. Plus, there is plenty of real estate on either side of the stem for mounting accessories and bags. Additionally, the Comp VentureMax XL also features a 4.6° back sweep, aero-shaped 38x22.5mm tops, and drilling for a Shimano EW-RS910 junction box. While the 52cm Comp VentureMax XL boasts a number of attributes including multiple hand positions, it's the return of the Bio-bend in the drop adds yet another design element that is practical and comfortable for whatever surface you choose to ride upon and for however long your adventure endures. - Broad, 52cm width offers plenty of space for mounting accessories and bags - The flattened 38x22.5mm top section provides a comfortable area for resting hands - Width is measured at the initial bend rather than at the hood - Material: double-butted 6061 alloy - Bend style: bio-bend - Top style: ergonomic - Width: 520mm - Drop: 102mm - Reach: 75mm - Drop flare: 24-degree - Flare out: 6-degree - Back sweep: 4.6-degree - Clamp diameter: 31.8mm - Accessory mount diameter: 31.8mm - Compatible with Shimano EW-RS910 junction box - Clip-on compatibility: yes - Other features: drilled at bar end for Shimano Di2 EW-RS910 junction box routing, C260 compatible - Weight: 350g

You really can have it all; Ritchey's WCS C-220 stem features revolutionary stiffness and classically inspired good looks, but it’s quick and easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The C-220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality chromoly steel bolts are used throughout. - Material: 3d forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer diameter: 1-1/8" - Faceplate Width: 42mm - Silver Finish - 121g (110mm)

- Length: 400mm - Offset: 0mm - Clamp Style: Standard Rails - Material: Aluminum

Replacement dropout kit for Ritchey Timberwolf frames - Includes both drive and non-drive side dropouts

The new Comp Skyline saddle keeps the ergonomic curve that supports sit bones and the generous cutout to relieve perineal pressure of the original Skyline but updates it with new construction for more durability, better aesthetics and a lighter weight. Built with a unique manufacturing technology that adheres the saddle cover to the base without any visible seams, glue, stitching, or staples, the new Comp Skyline is now waterproof, will last longer, and keeps the weight low. The saddle padding is made from a new polyurethane material that is 30% more shock absorbent than traditional foam, which reduces rider fatigue. Like the original, the new Comp Skyline features a curved, two-axis shape that brings a rise toward the rear of the saddle and a bit of lift to the nose. This shape is ideal for riders who lack flexibility and want more support, yet still offers a good position for riders who demand a healthy dose of performance with their comfort. Another highlight of the Skyline is Ritchey's revolutionary patented Vector Wing technology, which helps eliminate hot spots by dissipating pressure more evenly for all-day comfort for wherever your pedal strokes take you—road, gravel, trails, and beyond. - Vector Wing design - Curved, two-axis shape - Seamless cover & shell integration - Dimensions: 277x147mm - Rails: Cr-Mo - Rail dimensions: 7x7mm - Shell: Nylon + glass fiber - Padding: polyurethane foam - Cover: Ritchey synthetic upper - Weight: 265g

Conquer the local cross scene with Ritchey's SpeedMax Cross. Its diamond-pattern center delivers low rolling resistance with enough bite to ensure excellent traction, too. And, the Comp is great at shedding mud to keep you riding strong in even the nastiest conditions.

For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the Comp Drop In Integrated Headset stands above all others. The Comp features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. - Top cap: 8.3 or 15.3mm - Material: Alloy - Upper Fit (S.H.I.S.): IS42/28.6 - Lower Fit (S.H.I.S.): IS42/30 - Upper Bearing OD: 41.8 - Lower Bearing OD: 46/42 - Top Cover OD: 46 - Bearings: Sealed cartridge - Weight: 74g

Carbon seatpost with a proven low-profile, 2-bolt clamp that won't bottom out on the saddle. - Low-profile clamp reduces stress on lightweight rails - 2-bolt design securely holds the saddle in place and is easy to adjust - Offset: 25mm - Clamp Style: Standard Rails - Material: Carbon

Proven time after time to be a reliable, easily adjustable system that continues to outperform the competition, the 4-Axis stem is a surefire go-to for an entry level stem that has world-class performance. - Bar Clamp Diameter: 31.8mm - Material: Alloy - Stem Angle: 30 degrees - S.H.I.S. Stem Clamp Diameter: 28.6

The new Ritchey WCS Toyon stem takes its lead from the original, award-winning Ritchey C220 stem and gives it a more modern shape and increased stiffness for improved handling and greater responsiveness. The Toyon retains the clamping surface area of the C220, which creates a more secure interface by wrapping a full 220° over the handlebar. Its bolt forces are aligned with the clamp so that the body "embraces" the handlebar—a design which is less prone to damaging lightweight bars and allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. Built from life and all that inspires it, the Toyon builds upon the proven and celebrated C220 design with a fresh, squared aesthetic that adds to the overall harmony of modern frame designs—matching its good looks with enhanced confidence and a more lively feel for wherever your rides take you. - Matching top cap included - 6° of positive or negative rise - 1-1/8" steerer diameter - Stem body wraps 220° around bar clamping area, holding it in place for easy installation - Material: 2014 alloy - Bolts: stainless steel black - Matching top cap included - Angle: 84°/6° - Bar clamp diameter: 31.8mm - Bar clamp width: 44mm - Steerer diameter: 1-1/8" (28.6mm) - Steerer height: 42mm - Weight: 140g (100mm)

With a lifetime of experience of riding and winning on trails and racecourses around the world, the Ritchey tradition of designing ideal handlebars continues with the introduction of the WCS 10D Rizer. Taking inspiration from the original XC 10D flat bar, this 800mm-wide trail bar offers a generous 10° backsweep for perfect wrist alignment, 4° upsweep to reduce pressure on the outside of the hand, and 20mm rise for optimum positioning. All of this combines to deliver a uniquely comfortable and controllable mountain bike experience. Whether ripping your favorite trails from Moab to Houffalize or your local runs, the Ritchey WCS 10D Rizer bar will help deliver a lifetime of great mountain bike experiences. - Material: triple-butted 7050 alloy - Width: 800mm - Rise: 20mm - Backsweep: 10° - Upsweep: 4° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 350g