Filter By:
- Parts (99)
- Wheels (17)
- Accessories (4)
- Clothing (13)
- Car Racks (1)
- Show More Sizes
- Show Fewer Sizes
Race Face
$18.99
Race Face bottom bracket spacer kit for 124-130mm bottom brackets.
$16.00
Mylar-laced woven elastic guard stretches around your fork to block mud/water as you ride.
$119.99
The burliest women's short in the Race Face collection, the Khyber is recommended for aggressive riding when extra abrasion resistance and durability is preferred.
- Chamois not included
- Raised back panel for increased coverage
- Mesh-lined, zippered thigh vents
- Zippered front fly with dual-snap closure and Velcro reinforcement
- Brushed inner waistband
- Hem openings are large enough to accommodate Race Face pads
- Inseam: 14" (36cm)
- 100% Polyester, mesh interior
- DWR Treated
$35.00
The Trace rear axle fits Race Face wheels equipped with Trace hubs, like the Aeffect Wheelset. Use it as a replacement axle or to convert your wheel to a different axle standard.
- Light and strong alloy construction
- Compatible with Race Face Trace hub
$799.99
Race Face's first carbon wheelset comes to market during peak enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction.
2 year no fault guarantee
HUB
- Large oversize flange for improved bracing angle
- Larger bearings
- No bearing adjuster needed
- Wider bearing stance 6 double tooth pawls (3 engage at a time)
- 120 points of engagement (3 degrees)
- Independently sprung pawls
- Balanced spoke counter bore
- Tool-free interchangeable end caps (sold separately)
RIM
- Full carbon fiber construction
- 31mm Internal width tubeless ready rim
- 4.5mm Offset – Improves spoke balance and wheel stiffness
- High gloss black water transfer logos
$429.99
Pedal-heavy outings with rowdy all-mountain shredding can be very demanding on cranks. The Next R CINCH Crankset is light and strong where it matters most. Racing time or just rallying with friends, feel free to get a bit more sideways with Next R.
- Manufactured from UD Carbon with matte clearcoat
- Cinch technology for game-changing compatibility
- Includes 30mm spindle, for 68/73mm BB shells
$64.99
Built for all-mountain riding, the new Aeffect Rally 35 stem is a no nonsense workhorse. With increased strength and shorter length options available for modern bike geometry, Aeffect R performs well above its price point…and all of this at a competitive weight.
$55.00
When you need some peace of mind on your XC/Trail ride then look at the Charge knee pad for abrasion protection without sacrificing any pedaling comfort.
- Butterfly mesh sleeve provides a secure yet breathable fit
- Foam panel with stretch cover for abrasion protection
- Strategic seam construction for added overall comfort
- Silicone gripper along inner top opening plus silicone patch at shin ensures a secure fit
- This pad is NOT rated for impact; It is recommended for abrasion-resistance protection only
$2.00
Race Face Crank Arm Fixing Bolts
- For EXI Cranks
- Bolt Puller Cap Washer for self-extracting bolt
$45.99
Race Face's Chester bar is made of tough 6061 alloy with the perfect width, sweep and rise to be at home on both your DH and hardtail rigs. These bars will last long after your bones, bruises and scrapes heal up and you’re ready to tackle that gap jump that has had your number.
Features
- Manufactured from cold drawn, seamless 6061 Alloy.
- Butted for an optimal strength to weight ratio.
- Wider construction & re-designed taper offers
- 740mm wide
- 9° rearward, 6° upward
$54.99
Do you love to ride your mountain bike? Love boosting big airs, punishing the trails and your gear? You just want parts that can take a beating and won't let you down — the Chester 35 bar is made for you. These bars will last long after your bones, bruises and scrapes heal up and you're ready to tackle that gap jump that has had your number.
- Manufactured from cold drawn, seamless 6061 Aluminum
- Shot peened for increased fatigue life
- 35 optimized triple butted design
$99.99
- Forged 7050 AL gives this crank phenomenal strength, earning it an Enduro rating at light weight
- E-bike crankset
- Impressive strength to weight ratio
- Black satin finish
- CINCH direct mount for easy 1x Can be 2x with removeable spider (sold separately)
$129.99
- Follows the evolution of modern trail bikes and all-mountain rigs, providing you a more sure-footed, durable pedal to match your single-track endeavors.
- Thin and lightweight
- Bottom loaded hex-head threaded pins (20x/pedal)
- Body: 15.5mm thick
- Platform: 110mm x 115mm
- Chromoly steel axle
- Bearing/bushing
- Internals are fully serviceable and replaceable
- 440g
$179.99
XC riding is changing – Bikes, trails and riders are all progressing and pushing boundaries. Our new Next SL bar was designed to reduce rider fatigue without compromising handling. This bar allows good vertical flex for comfort, while also eliminating bad horizontal flex to improve steering precision.
$104.99
The ARC Offset rims utilize an asymmetrical design to optimize spoke tension balance, wheel durability, and wheel stiffness. Its 6069 Alloy construction provides a superior strength-to-weight ratio, significantly improving toughness.
- Offset nipple bed for improved spoke tension balance and wheel strength/stiffness
- Strong tire retention bead
- Tubeless ready
$69.99 - $74.99
Narrow wide chainrings compatible with Race Face CINCH system cranks. Direct mounting allows an easy switch between rings and spiders.
- Compatible with 9, 10, 11, and 12 speed
- Narrow Wide tooth profiling ensures consistent chain retention
- Lockring installed/removed with ISIS BB tool
- Stiff 4mm plate thickness to transfer loads without flexing
$89.99
Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you.
- Manufactured from cold drawn, 7075 Aluminium
- 35 optimized triple butted design
- Turned up to Rally control with 800mm width
- Rise sizes to for every build and preference 10/20/35mm
- Stealth black on black decals to match every frame color
$179.99
- Intended use: XC and Trail
- Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform
- Manufactured from UD Carbon with matte clearcoat
- Requires 35mm bar clamp diameter stem
- 8 degree rearward sweep, 5 degree upward sweep
$64.99
Direct Mount 3-bolt chainrings compatible with SRAM cranksets with a removable Spider. Narrow Wide tooth profiling ensures ultimate chain retention.
- 7075-T6 aluminum, aerospace grade strength
- Stiff 4mm plate thickness to transfer loads without flexing
$11.99
Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
$11.99
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips.
Compatible with:
- Race Face
- Turbine Cinch
- Atlas Cinch
- Atlas (24mm Spindle)
- Turbine (24mm Spindle)
- Aeffect Cinch (175mm length ONLY)
- Most other popular alloy MTB cranks (except some alloy DH cranksets)
$89.99
Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it?
- Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform
- Requires 35mm bar clamp diameter stem
- Full 800mm width that can be trimmed down to a minimum 750mm
- 8 degree rearward sweep, 5 degree upward sweep
$44.99 - $69.99
RaceFace Narrow Wide Chainrings feature tooth profiling for chain retention and a blend of weight and durability suitable for XC, DH, and everything in-between.
- 7075-T6 aluminum, aerospace grade strength
- Compatible with 9, 10, 11 and 12 speed
- Stiff 4mm plate thickness and I-beam construction transfer loads without flexing
- Reversible laser etched graphics
- Non-threaded bolt holes
$29.99
Race Face's Ride stem is designed specifically for riders looking for Race Face engineering and quality at a value price point.
- Forged and shot peened from 6061 aluminum for high strength and fatigue resistance at a reasonable weight
- Four bolt bar clamp holds bar securely in position
- Machined logo on bar clamp
$74.99
Race Face's popular AR rims have been updated for 2019 with an asymmetric rim profile, improving spoke tension balance and overall wheel build quality and durability. The rim extrusion has also been improved to increase impact performance for more aggressive applications. With a tubeless compatible rim profile and color match capabilities, these rims are ready for any build you can throw at them.
- Offset nipple bed for improved spoke tension balance and wheel strength/stiffness
- Tubeless ready with strong tire retention bead
$69.00
Down Under
Mounted under your bar, the redesigned Turbine R 1x Seatpost Lever may just become your thumb's new best friend. This strong, lightweight lever is a real smooth operator that is a breeze to actuate. Optimized for use with our Turbine R dropper but will play nice with other posts.
Strong For Any Size
This lever is made from forged and machined 6061-T6 Alloy for lightweight durability. Comes with all clamp options, including Matchmaker and I-Spec EV.
Thumbs up
To show your thumb a good time, this lever features a textured non-slip pad and moves on an oversized sealed bearing pivot for pure silky performance.
Rainbow Drop
Available in black and 5 other vibrant colors, the Turbine R 1x lever will work with other cable-operated posts needing 10mm or less of cable pull.
- Compatible with Matchmaker
- Includes cable and housing
- Mechanical lever actuation
- Weight: 33g
$479.99
- Manufactured from UD Carbon with matte clearcoat
- Handmade in Canada
- SixC G2 Pedal Insert for increased Rally Factor
- Burlier 7050 Spindle
- Cinch technology for game-changing compatibility
$51.99
Easy Choice
No need to overcomplicate things. The simple, but technical fabric and styling of the Nimby SS Jersey is a perfect go-to for chewing up trail, playing in the bike park, or just pedaling around town.
Class in Session
"Sophisticated" isn't a word that is used a lot when talking about mountain bike graphics, but when it fits, it fits.
Trail To Town
The NIMBY goes the extra mile when it comes to the detailing, making it a perfectly great-looking shirt, on or off the bike.
Comfort Country
Flatlock stitching throughout means no pokey, irritating areas, just pure comfort.
- Flatlock stitching
- Short Sleeve
- Fade-free sublimated graphics