Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Race Face

$89.99
Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep
$89.99
RaceFace CINCH Spindle - Fits 135/142 and 141/148mm Hub Spacing
$89.99
RaceFace CINCH Spindle - Fits 150/157mm Hub Spacing
$89.99
RaceFace CINCH Spindle - Fits 150/157mm Hub Spacing
$89.99
For Race Face 30mm Cinch System cranks only. Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle. - 30 x 136.5mm is for 120mm spaced BMX hubs and 68/73mm BBs - 30 x 151.5mm is for 150/157mm Hubs
$89.99
- eMTB rated with steel axles - 6902 cartridge bearings and robust 10 degree engagement - 32h spoke count - For J-Bend spokes only
$89.99
Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you. - Manufactured from cold drawn, 7075 Aluminium - 35 optimized triple butted design - Turned up to Rally control with 800mm width - Rise sizes to for every build and preference 10/20/35mm - Stealth black on black decals to match every frame color
$89.99
- 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio - Race Face's triple butting design maintains strength in critical areas while reducing overall weight - The tube is anodized & shot peened for increased fatigue life - Updated Hunter head design for easy saddle installation and full adjustability - 3D forged from 2014 heat treated aluminum with triple butted mast - Thumbscrew tightening system allows quick dial-in of the saddle angle by hand - Angled clamp bolts allow easy tool access for hassle free adjustment - Rubber grommet seals the post to prevent water from entering seat tube - Accepts 7/8mm CrMo/alloy and 7/9mm carbon rails. 260g (30.9mm)
$90.00
- Adjustable hook and loop strap closure around the calf and silicone gripper on the upper thigh provide a secure fit. - Removable D3O LP1 foam pad provides certified impact protection. - Lycra front panel and mesh rear panel for comfort and breathability. - Abrasion-resistant knee cover for durability. - Silicone patch at shin combats slippage. - Unisex size range.
$95.00
Replacement Freehub Body for Trace hubs.
$99.99
- Forged 7050 AL gives this crank phenomenal strength, earning it an Enduro rating at light weight - E-bike crankset - Impressive strength to weight ratio - Black satin finish - CINCH direct mount for easy 1x Can be 2x with removeable spider (sold separately)
$99.99
The RaceFace Atlas is designed to bridge the needs of AM and FR/DH riders: light enough for AM, tough enough for FR and DH, providing the ultimate in versatility. - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry - Faceplate eliminates stress risers which cause your bar to bend or break - Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube - Stack Height: 40mm
$99.99
RaceFace Ride crank arms are forged from 6066 aluminum with aggressive styling for a high strength to weight ratio. - Bottom bracket sold separately
$102.00
A baggy trail style short with unrestricted mobility recommended for everything from epic days in the saddle to multi-discipline Enduro racing. - Four-way stretch woven fabric - Corded nylon back panel for increased coverage and protection against tire spray - Inner waistband adjust system with silicone gripper print - Zippered front fly with dual-snap closure and Velcro reinforcement - Inseam: 13.25" (35cm) - DWR treated fabric (89% polyester, 11% spandex) - Chamois not included
$104.99
The ARC Offset rims utilize an asymmetrical design to optimize spoke tension balance, wheel durability, and wheel stiffness. Its 6069 Alloy construction provides a superior strength-to-weight ratio, significantly improving toughness. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Strong tire retention bead - Tubeless ready
$104.99
The ARC Offset rims utilize an asymmetrical design to optimize spoke tension balance, wheel durability, and wheel stiffness. Its 6069 Alloy construction provides a superior strength-to-weight ratio, significantly improving toughness. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Strong tire retention bead - Tubeless ready
$105.00
The Race Face Covert Knee Pad is a highly breathable knee guard that features the ultra low profile, CE-certified D3O Ghost pad. All the protection, none of the bulk. - D3O Ghost knee pad - Mesh body with lycra rear gusset - Woven elastic with gripper sewn into rear gusset - Ripstop knee cover - Silicone grippers top and bottom - Removable pad
$109.99
30mm Heavy Duty rim for gravity and e-bike applications. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Tubeless ready, strong tire retention bead
$109.99
RaceFace designed their Atlas 35 stem to reduce overall system weight while retaining the proven stiffness and performance the Atlas line is known for. The stem itself is measurably stiffer than the 31.8mm offering and, although the system is a seemingly burlier build, the weight savings gained by the reduction in bar material actually makes the 35 system lighter overall. An impressively light, strong addition to your aggressive trail or DH/FR build. - Four-bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry - Faceplate eliminates stress risers which cause your bar to bend or break - Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube - Stack Height: 40mm
$109.99
The RaceFace Atlas 35 direct mount stem is an all new 2-piece direct mount design. Super lightweight, low profile design with flush mount bolts and 5mm spacers kit to let you dial in your perfect set up. - Machined from 2014 Aluminium - Weight-saving single bolt faceplate
$109.99
Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. - CNC Aluminum - 0-degree rise for perfect fit on aggressive bike frames - Extensive CNC machining for weight reduction without impacting strength - TopLock faceplate design for easy and secure installation
$114.00
Features D3O high performance foam and an open-back construction so no shoe removal is necessary. • D3O high performance shock absorbing foam on the front and foam padded sidewalls for additional coverage • Perforated Neoprene enhances venting and moisture control; terry lined for wicking and comfort • Integrated stabilization pad centers the knee and ensures a secure fit • Branded rubber grab tabs and RF moniker logo • Open back construction; no shoe removal necessary
$114.99
The RIDE crank arm set offers CINCH versatility, adaptable chainring options, and the 24mm EXI interface system for easier installation and removal. This set is a budget-friendly option with signature RaceFace styling, performance and craftsmanship. - Offers CINCH system compatibility - 24mm EXI interface for easier crank installation - Forged from 6066 aluminum with aggressive styling for a high strength to weight ratio - Compatible with CINCH direct mount alloy or steel rings - Direct mount chainline: 78.5mm / 85mm (Flipped Ring) - 2X Cinch spider chainline: 77mm - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 190/197 Hubs - Crank Intended Use: Fat Bike - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace EXI - Chainring BCD: Direct Mount CINCH - BB Included: No
$119.99
The Race Face Aeffect crank is designed to handle aggressive trail riding at XC crank weight and an attractive price point. Features the CINCH system with its interchangeable spider options and a 24mm EXI interface spindle. - Crank arms forged from 6066 aluminum - Compatible with all CINCH direct mount rings and spiders to easily convert between existing chainring standards - Compatible with direct mount, 1x, 2x with - and without bash, and 3x configurations - 24mm EXI spindle compatible with Race Face X-Type bottom brackets or Hollowtech II compatible bottom brackets - CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS cup BB tool for removal and installation - Bottom bracket sold separately
$119.99
The burliest women's short in the Race Face collection, the Khyber is recommended for aggressive riding when extra abrasion resistance and durability is preferred. - Chamois not included - Raised back panel for increased coverage - Mesh-lined, zippered thigh vents - Zippered front fly with dual-snap closure and Velcro reinforcement - Brushed inner waistband - Hem openings are large enough to accommodate Race Face pads - Inseam: 14" (36cm) - 100% Polyester, mesh interior - DWR Treated
$129.99
- Follows the evolution of modern trail bikes and all-mountain rigs, providing you a more sure-footed, durable pedal to match your single-track endeavors. - Thin and lightweight - Bottom loaded hex-head threaded pins (20x/pedal) - Body: 15.5mm thick - Platform: 110mm x 115mm - Chromoly steel axle - Bearing/bushing - Internals are fully serviceable and replaceable - 440g
$129.99
The Best Of Both Metals The Aeffect pairs a thin, lightweight 6061-TI aluminum body with a cro-mo axel that runs our tried and true bearing and bushing set-up. Surefooted As A Mule You want traction? You got it. Bottom loading hex-head threaded pins give you all the bite and foot security you need. Your True Colors Shining Through Pick from three vibrant colors to compliment your build and your personal sense of style. Just don't choose wrong or they'll make fun of you. Get Up Stand Up Like a good trail dog, the Aeffect Pedal is most in its element on a flowy section of backwoods Nirvana. Designed with a smaller body, this strong, durable, rebuildable pedal is made to chase stoke all day long. Specs: - Axle Material: Chromoly Steel - Body Material: 6061 Aluminum - Material: 6061 Aluminum - Platform Height (MM):16.9 - # of Pins: 20 SHCS hex traction pins per pedal (10 per side) - Platform L x W (MM): 101 x 100 - Weight: 375g
$130.00
- A Kydex pierce-proof layer and a removable D3O LP1 pad provide certified impact protection. - Durable TPU skid plate for sliding during crashes along with a ripstop knee cover for abrasion resistance. - Stretch mesh rear panel with an integrated perforated elastic above the calf for a secured fit. - Ariaprene body fabric is highly breathable and a sustainable alternative to neoprene. - Foam padded side walls offer additional coverage. - Silicone gripper print inside top opening to prevent slippage. - Unisex size range.
$134.99
The RaceFace Aeffect R crankset offers enduro-rated strength in a lightweight XC-style package, making it a solid and dependable crankset choice. - Its forged 7050 AL construction optimizes stiffness without added weight - The Aeffect R features the versatile CINCH system for plenty of interchangeable spider options - Can run alloy or steel CINCH direct mount chainrings - Boost-compatible 24mm EXI interface spindle - Direct mount chainline: 51mm / 57.5mm (Flipped Ring) - 2X Cinch spider chainline: 49.5mm - Boost 2X Cinch spider chainline: 52.5mm - Number of Chainrings: No Rings, No Spider Included - Chainline/Hub Compatibility: 135/142 MTB Hubs, 141/148 Boost Hubs, 150/157 DH Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace EXI - Chainring BCD: Direct Mount CINCH - BB Included: No - Chainring Included: No
$149.99
- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post - Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head - Angled clamp bolts allow easy tool access for hassle free adjustment and tightening - The rubber seatpost grommet fully seals the post to prevent water entering your seat tube - Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon - Wide lower cradle gives extra rail support for lightweight saddle rails - Narrow upper cradle increases the amount of forward/back saddle adjustment - Tilt Adjustment 6° up 12° down with Zero offset