NiteRider Bicycle Lighting

The Swift 300 gives you more than enough lumens at our lightest weight for headlights (82 grams). NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. The Swift 300 features a highly durable light housing with Dupont Fiberglass reinforced nylon meeting all required FL1 Standards for impact testing and water / dust resistance. Vmax+ 150 is NiteRider's first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light-easily clipping onto straps, belt loops, and more. SWIFT 300 FRONT LIGHT FEATURES - Lumen Output: 300 - 5 Modes with Run Times: 2:00 – 28:00h - Charge Time: 2:00h at greater than 500mA | 3:15h at 500mA - Water / Dust Resistant IP64 Rated - USB Rechargeable SWIFT 300 TYPICAL RUN TIMES Low—15:00h at 80 Lumens Med—9:00h at 150 Lumens High—2:00h at 300 Lumens Flash—12:00h at 300 Lumens Walk—28:00h at 20 Lumens Vmax+ 150 TAILLIGHT FEATURES - Lumen Output: 150 - 6 Modes with Run Times: 5:30-27:30h - Charge Time: 2:00h - Water / Dust Resistant IP64 Rated - USB-C Rechargeable Vmax+ 150 TYPICAL RUN TIMES Fast Flash—12:45h Slow Flash—10:15h Disco Flash—10:45h Pulse Flash—7:00h High Steady—5:00h Low Steady—27:00h

Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

Producing 900 brilliant lumens, the NiteRider® Lumina™ Micro 900 is smaller, lighter, and more compact than the original Lumina™ series. Vmax+™ 150 is NiteRider’s first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light—easily clipping onto straps, belt loops, and more. For added convenience, the Vmax+ 150 features mode memory, will power ON in the last mode used. LUMINA™ MICRO 900 FEATURES - Lumen Output: 900 - 5 Modes with Run Times: 2:00 – 60:00h - Charge Time: 2:30h at greater than 500mA | 4:30h at 500mA - Weight: 130g - Low Battery Indicator and Micro USB Rechargeable - Water / Dust Resistant IP64 Rated LUMINA™ MICRO 900 RUN TIMES Low - 11:00h at 200 Lumens Med - 4:30h at 450 Lumens High - 2:00h at 900 Lumens Flash - 11:00h at 900 Lumens Walk - 60:00h at 30 Lumens Vmax+™ 150 TAILLIGHT FEATURES - Lumen Output: 150 - 6 Modes with Run Times: 5:30-27:30h - Charge Time: 2:00h - Water / Dust Resistant IP64 Rated - USB-C Rechargeable - Mode Memory (Powers ON in the last mode used) Vmax+™ 150 RUN TIMES Fast Flash - 11:30h Slow Flash - 9:30h Disco Flash - 9:45h Pulse Flash - 6:00h High Steady - 4:30h Low Steady - 25:30h Note: The NiteRider® Lumina™ Micro 900 is shipped from the factory in Travel Lock Out Mode. This mode feature is designed to save battery power by preventing the headlight from accidentally turning on while in storage. Simply press and hold the power button for 8-10 seconds to lock/unlock.

Epro 1000 is NiteRider's first headlight specifically made for electric bikes. It comes with pre-wired power line for connection to the eBike's battery. Power line cable measures approximately 52" in length. Headlamp powers on with ignition switch. Features two modes-Steady ON and Pulse Flash-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 1000 - 2 Modes - Hardwired, Voltage 12 to 40 Volts 1.2 amps at 12v, 300mA at 40 volts - Water / Dust Resistant IP64 Rated - Weight: 166 grams - Fits 22mm-31.8mm seat posts - Includes a pre-wired Epro 1000 Head Light, Handlebar Clamp Mount, and Rubber Mounting Shims LIGHT MODES 1) Steady ON 2) Pulse Flash NiteRider recommends this headlight be installed by an authorized e-bike service and repair shop. Please reference your bike manufacturers manual for compatibility. Not compatible with 6 Volt systems.

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

The All New NiteRider Lumina Dual 1800 represents the next evolution of our best-selling Lumina headlight into a dual LED set-up that produces a far-reaching beam pattern with extensive peripheral illumination; making it the ideal choice for any riding situation or terrain. The Dual emits an amazing 1800 lumens while in Boost Mode, making it one of the brightest self-contained bicycle lights available today. Simply double tap the power button to set the light to Boost Mode. When in Boost Mode, the power button will illuminate red and blue to notify the user at a glance. The Dual is also equipped with side lighting to increase your visibility day or night. Tested, meeting an IP64 rating; The Dual 1800 is designed to be used in a variety of riding conditions because of its high resistance to water and dust. Its high-strength Dupont Fiberglass reinforced nylon body casing and aluminum heat sink are engineered for extreme resistance to cracking and abrasion. - All New Collimator Lens, distributes a smooth widespread beam pattern - Side lighting for increased visibility day or night - Long lasting 20 hour runtime at 100 lumens in Walk Mode - 5 Light Levels plus 2 Daylight Flash Modes - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Helmet mountable (Helmet Mount sold separately) - Fast 3 hour charge via the included AC power charging adapter - Low battery indicator - Extend your ride time, 6 hour runtime at 350 lumens in Low Mode - Boost Mode indicator, power button will light up red and blue - Boost Mode, double tap power button to unleash maximum LED output at 1800 lumens! - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY - The Lumina Dual 1800 is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - Dual LED Head Light - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - AC Power Charging Adapter

The NiteLink remote allows the rider to pair and simultaneously power on/off the Lumina Max headlight and Omega EVO 300 taillight wirelessly. - All New design equipped with NiteLink Wireless Technology - Lights sold separately

Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm. System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems