Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

DT Swiss Hubs

$0.16
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring
$0.70
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$3.40
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Driver Spring - Ratchet EXP
$3.40
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Spacer Sleeve - 10.1mm, for 3-pawl
$3.40
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Star Ratchet Spring
$4.80
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Driver Spacer - Alloy, 10.7, EXP
$8.10
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.
$8.20
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Service Kit - 3-Pawl
$9.60
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240 Disc Ring Nut
$9.60
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 3 Pawl Ring Nut
$14.90
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Cassette Seal: Fits all ratchet drive hubs
$14.90
Tubeless valves for DT Swiss rims for repair or replacement. - DT Swiss Narrow Base Tubeless Valve - 40mm
$15.28 - $21.69
Developed for short spokes with a large deflection angle. DT Pro Head nipples are designed for short spokes with a large angle of deflection, such as for e-bike use. Through the spherical contact surface, the nipple aligns automatically with the angle of the spoke, which leads to consistent power transmission. Note: brass nipples are not approved for children's products in the USA. See attached warning! All-brass nipples are recommended for e-bike use. - Weight: starting at 59g for 64 nipples.
$16.00
- Professional wrenches fit internal nipples on many deep section aero rims
$16.00
Pro Head Reinforcement System (PHR) has a larger and more spherical contact area and is designed to balance loads transferred to the rim. The PHR system acts as a ball and socket interface, allowing the spoke to pivot into alignment while maintaining even, consistent contact during installation in order to follow the perfect trajectory from the hub to the rim.
$16.30
Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 1526 Bearing for Rear Driveside Spline 1200, 2nd Generation Spline1501 and Dicut Disc Wheels
$16.30
Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 18307 Bearing
$16.30
Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 2737 Bearing for 240s Predictive Steering Hubs
$16.30
Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6802 Bearing
$16.30
Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6805 Bearing
$16.30
Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss Cartridge Bearing - 1728
$16.30
Tubeless valves for DT Swiss rims for repair or replacement. - DT Swiss Narrow Base Tubeless Valve - 73mm
$16.89 - $47.11
The buyer's choice for wheel builders looking to save weight. The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use. - Weight: starting at 20g for 64 nipples
$17.00
Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6803 Bearing
$17.50
- Slotted construction for securing Aerolite bladed spokes - Helps prevent spoke twisting while wheel building/truing - Red handle for 0.8-1.0mm spokes - Black handle for 1.0-1.3mm spokes
$17.60
Recommended by DT Swiss for lubrication of Ratchet mechanisms found in DT's Ratchet, Ratchet EXP and Ratchet LN hubs
$18.30
DT Swiss spoke wrenches for repairing all types of DT Swiss wheels. - Multi-tool for DT aero spokes, torx, and square nipples
$21.41
This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - Compatible with straight pull hubs only - One 264mm spoke = 5.9g - Nipples sold separately
$22.00
Excellent modulation, cooler temperatures, and great wet weather brake performance. The Black Prince brings the feel of braking on alloy wheels to carbon wheels. - Pad Type: Replacement Insert-Cartridge - Intended Brake Type: Caliper - Rim Compatibility: Carbon
$23.99 - $52.79
Ease of use, lightweight, and optimum performance in a single product. The DT Pro Head shape, combined with both a torx and a square tool interface, makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. All-brass nipples are recommended for e-bike use. Weight: starting at 26g for 64 nipples.
Page 1 of 10 Next page