Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Chris King ISO Disc Hubs

Chris King XD Driveshell
$285.00
Chris King ISO XD Driveshell assembly, complete with bearings.
Chris King Classic Low-Flange Road Hubs
$215.00 - $410.00
Chris King Classic hubs are the ultimate lightweight, high performance hubs. And, at only 264g for the rear and 112g for the front, it's hard to believe that they are also some of the toughest hubs out there. Available in King's nine classic anodized colors and multiple hole drillings, it's a short trip to lacing up the wheels that you've always wanted for your road or 'cross ride.
Chris King ISO Rear Disc DH Hub (150 x 12mm)
$435.00
The fastest route to the bottom of the mountain isn't always the easiest on your equipment, but Chris King's ISO DH rear hub is built to survive the knock-down, drag-out world of shuttle runs and all-out technical gnar. It starts with a super tough, large-diameter hub shell and Chris King's renowned, lightning fast pedal engagement. Tall hub flanges build a stiffer wheel, and the 150 x 12mm axle is as burly as they come. The hub is also compatible with a 157 x 12mm replacement axle (sold separately).
Chris King R45 Rear Disc Hub
$410.00 - $445.00
Built to meet the requirements of the world's most demanding road and 'cross riders, Chris King's R45 Disc Hubs deliver the durability, fast-rolling performance, and serviceability that the company is known for. The hubs spin on Chris King's made-in-house stainless-steel bearings, and the 45-point RingDrive engagement provides near-instantaneous pedal response. The R45 rear disc hubs are available with your choice of 11-speed Shimano/SRAM or Campagnolo freehub bodies. Six-bolt rotor compatibility keeps setup and maintenance simple so you can spend more time riding and less time wrenching.
Chris King ISO Rear XD Driver Disc Hub (150 x 12mm)
$475.00
Everything about Chris King's ISO rear hub means business. From the extra-large hub shell and wide-radius spoke flange, to the made-in-house ball bearings and lightning fast engagement, you’ll love everything about the ISO rear hub. King's XD Driver body is compatible with SRAM's 11-speed mountain drivetrains. The 150 x 12mm thru-axle compatibility adds rear end stiffness and efficiency, and it’s compatible with 157 x 12mm replacement axles (sold separately).
Chris King R45 Front Disc Hub
$215.00
Built to meet the requirements of the world's most demanding road and 'cross riders, Chris King's R45 Disc Hubs deliver the durability, fast-rolling performance, and serviceability that the company is known for. The hubs spin on Chris King's made-in-house stainless-steel bearings. Plus, six-bolt rotor compatibility keeps setup and maintenance simple so you can spend more time riding and less time wrenching.
Chris King ISO 20mm Front Hub
$215.00
Chris King's engineers took the 20mm thru-axle standard and built the final word in front hubs around it. Their ISO 20mm thru-axle hub incorporates a one-piece 110mm-wide aluminum axle that provides incredible front end stiffness as well as point-and-shoot steering. With Chris King's largest ever stainless-steel bearings, all manufactured in-house in Portland, Oregon, this hub is tough enough to tackle your local favorites or shuttles on Porcupine Rim. Six-bolt disc compatibility keeps setup and parts choices simple so you can focus on riding not wrenching.
Chris King R45 Disc 11-Speed Rear Hub
$451.00
The R45 142x12 Disc rear hub combines Chris King's low-drag 45-tooth RingDrive system, a lightweight hub body, and legendary made-in-house bearings with ISO disc mounts to harness the power of disc brakes. The R45 Disc hub gives you the control of disc brakes while descending, the fast rolling speed of Chris King bearings on long flats, and the superior engagement of the RingDrive engagement system out of the corners. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Patented RingDrive system with 45 simultaneously engaged points of contact for virtually drag-free engagement - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with Chris King's R45 Hub Service Tool - Chris King's lightweight solution for top caliber racing - Shimano/SRAM compatible - Ceramic bearing upgrade available
Chris King Titanium Cassette Cog Lockring
$49.00
Designed with today’s taller, double-digit cog stacks in mind, Chris King's cassette lock rings feature longer threads to provide secure engagement with the hub driveshell. A Chris King cassette lock ring is the perfect complement to any Chris King hub, or for anyone looking to add a dash of King performance to other manufacturer’s compatible rear hubs. These titanium lockrings are the pinnacle of bike bling.
Chris King R45D Centerlock Front
$264.00
R45 Centerlock hubs combine a lightweight hub body, our legendary made-in-house bearings, and now Centerlock compatibility to harness the power of disc brakes. The result is the increased power and modulation of disc brakes, the fast, smooth rolling speed of our bearings, and the rail steering from our one piece solid axles. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Engineered, manufactured and assembled in Portland, Oregon USA - Legendary made-in-house bearings - 5-year built-to-last warranty - Easily convertible axles 100mm x 9mm QR or 100mm x 12mm thru axle front options. - Easily serviceable and completely re-buildable with our R45 Hub Service Tool
Chris King R45D Front
$241.00
R45D hubs combine our low-drag 45-tooth RingDrive system, a lightweight hub body, and our legendary made-in-house bearings. The result is the increased power and modulation of disc brakes, the fast, smooth rolling speed of our bearings, and the superior responsiveness of our RingDrive engagement system when you put the power down. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Patented RingDrive system with 45 simultaneously engaged points of contact for virtually drag free engagement - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our R45 Hub Service Tool - Ceramic bearing upgrade available
Chris King R45 Rear
$451.00
When we set out to design our R45 hub we had over 30 years of bearing experience and 20 years of building hubs under our belts. The R45 is the culmination of that experience; we focused on creating a lightweight road racing hub that utilized hallmarks of Chris King components: precision, performance, and quality. Our R45 rear hub combines a redesigned RingDrive system with 45 teeth for lower drag and near instant engagement with a lightweight hub body and our legendary made-in-house bearings. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. The patented Chris King RingDrive with 45-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our R45 Hub Service Tool
Chris King ISO 135 QR
$460.00 - $504.00
Make Chris King's ISO Rear Hub the first and final choice for your bomb-proof, any trail, anywhere wheels. This quick-release rear hub is the fast-rolling, high-mileage piece of gear that your bike has been waiting for. The large diameter hub shell uses Chris King's made-in-house stainless-steel bearings for unbeatable strength and durability, and the freehub offers near-instantaneous pedal engagement. Six-bolt rotor compatibility keeps setup and parts choices simple so you can spend more time riding. And, this hub is compatible with either 10mm or 142 x 12mm replacement axles (sold separately).
Chris King ISO SD Front
$241.00 - $249.99
The Chris King ISO Small Diameter (SD) front hub is designed for mountain bikers seeking a lightweight hub that doesn’t compromise performance. Milled from solid bar stock, the high flange diameter grants the use of shorter spokes and a wider bracing angle to increase wheel strength. Proven by professionals and chosen by privateers, our ISO SD hub puts you in the race with legendary Chris King performance. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our Chris King Hub Service Tool - Responsibly lightweight - Easily convertible between standard QR and 15x100mm axles
Chris King R45 Front
$230.00
The R45 front hub is built to address our road and cross riders’ demands for Chris King performance in a lighter weight and more aerodynamic package. Defined by a narrow hub body and low flanges the R45 front hub is a sleek base for the fastest wheels. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our R45 Hub Service Tool
Chris King ISO 142x12
$450.00 - $460.00
Everything about Chris King’s ISO rear hub means business. From the extra-large hub shell and wide-radius spoke flange, to their own in-house ball bearings and lightning fast engagement. The ISO rear hub might just be the last hub you ever own. The 142 x 12mm axle adds rear end stiffness and efficiency, and these hubs are compatible with 135mm-wide, 10mm, and 12mm replacement axles (sold separately).
Chris King ISO B Rear
$460.00 - $504.00
Chris King ISO B 148x12 rear hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, ISO B hubs have heavy-duty bearing seals, and a threaded driveshell seal ring. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use.?? The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound. - Engineered, manufactured and assembled in Portland, Oregon USA - Updated hub shell shape with canted flanges for stronger wheel builds - 5-year built-to-last warranty - Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our Chris King Hub Service Tool - Responsibly lightweight - Specifically designed for "BOOST" 148mm x 12mm axle standard
Chris King ISO B Front
$241.00
Chris King ISO B 110x15 front hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub with rail accurate steering, transferring every minute adjustment you make to the trail. To thwart mud, water, and contaminants as you power through rough trails, ISO hubs have heavy-duty bearing seals, and a threaded driveshell seal ring. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Engineered, manufactured and assembled in Portland, Oregon USA - Optimized flange angle/alignment for improved spoke path, and symmetric wheel build - 5-year built-to-last warranty - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our Chris King Hub Service Tool - Responsibly lightweight
Chris King R45D Centerlock Rear
$482.00
R45 Centerlock hubs combine a lightweight hub body, our legendary made-in-house bearings, and now Centerlock compatibility to harness the power of disc brakes. The result is the increased power and modulation of disc brakes, the fast, smooth rolling speed of our bearings, and the rail steering from our one piece solid axles. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. Product Benefits - Engineered, manufactured and assembled in Portland, Oregon USA - Legendary made-in-house bearings - 5-year built-to-last warranty - Patented RingDrive system with 45 simultaneously engaged points of contact for virtually drag free engagement - Easily convertible axles 100mm x 9mm QR or 100mm x 12mm thru axle front options. 135mm x 10mm QR or 142mm x 12mm thru axle rear - Easily serviceable and completely re-buildable with our R45 Hub Service Tool - Ceramic bearing upgrade available - Lockring is sold separately (PHB355) and is required for rotor installation on rear hub
Chris King ISO Singlespeed
$475.00
The Chris King ISO Single Speed (SS) rear hub is the choice for the dedicated mountain bike single speeder. Our ISO Single Speed hub has a wider hubshell to create a near dish-less wheel adding extra strength and durability to your single speed wheel. This is combined with the precision of our made-in-house bearings and the patented engagement of our RingDrive™ system to give these hubs an efficient balance of simplicity, durability, and performance. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our Chris King Hub Service Tool - Available in 9 beautifully anodized colors - Responsibly lightweight - Specifically designed for 135mm rear dropout spacing (compatible with QR inserts) - Comes equipped with a Chris King 18t stainless steel cog, a Chris King lockring, FunBolts and two spacers for a precise setup
Chris King Custom 26
$919.99 - $2,449.93
Chris King ISO Disc Hubs! Known throughout the bicycling industry for their superior performance and extreme durability, Chris King is an industry leader in high performance, high engagement hubs! Designed, hand crafted & machined right here in the United States, Chris King leads the market with their advanced hub designs. Chris King hubs offer some of the fastest engagement hubs around, with the pawls engaging every 5 degrees. This means that for ever 360 degrees of revolution, a Chris King hub is going to engage 72 times. One would think that such high technology would come with a weight penalty; however Chris King has engineered the design of their hubs to be some of the lightest around! Custom Hand Built Wheelsets Richards Bicycles builds some of the best hand built wheelsets in the bicycling market. Each wheel or wheelset that we sell is hand built by our professional wheel builder, who has been building wheels with us for over 25 years. He has more experience building top of the line wheels than almost any other person in the industry, and we guarantee our wheel builds to be the best that you can find. When your wheelset is built, each spoke is individually prepped using spoke-tite and tensioned by hand, ensuring a wheelset that remains strong & true for many years to come. Many other wheel builders do not go to such lengths to ensure a perfect wheel build. Together, our team has over 120 combined years of experience with bicycles and we stand by every product we sell. Shipping & Build Time Because all of our Chris King, Industry Nine, Hadley & Hope wheelsets are all hand built in house as they're ordered, wheels are generally built within 1 week and shipped immediately after. Generally speaking, most customers receive their wheelsets within 2 weeks of ordering their wheels; however in some instances certain color / sizes hubs may not always be immediately available which could add to shipping time. If there is going to be any added delay because of product availabity, we'll let you know immediately. Thanks for your patience and cooperation!
Chris King ISO Disc Mavic 823 Disc 26
$959.99 - $1,464.93
Use our Mavic 823 Disc Chris King ISO Disc custom wheelset builder to build your ultimate 823 Disc Chris King wheelset. With this custom wheelset builder, you'll be able to customize multiple aspects of this wheelset, such as spoke type & color, Chris King Hub axle configuration, nipple color, and so on. With this Mavic 823 Disc Chris King wheelset builder, you'll have complete control over the final design of your Chris King custom wheelset, giving you the ability to truly build the ultimate unique wheelset that you've always dreamed of! Chris King ISO Disc Hubs! Known throughout the bicycling industry for their superior performance and extreme durability, Chris King is an industry leader in high performance, high engagement hubs! Designed, hand crafted & machined right here in the United States, Chris King leads the market with their advanced hub designs. Chris King hubs offer some of the fastest engagement hubs around, with the pawls engaging every 5 degrees. This means that for ever 360 degrees of revolution, a Chris King hub is going to engage 72 times. One would think that such high technology would come with a weight penalty; however Chris King has engineered the design of their hubs to be some of the lightest around! Custom Hand Built Wheelsets Richards Bicycles builds some of the best hand built wheelsets in the bicycling market. Each wheel or wheelset that we sell is hand built by our professional wheel builder, who has been building wheels with us for over 25 years. He has more experience building top of the line wheels than almost any other person in the industry, and we guarantee our wheel builds to be the best that you can find. When your wheelset is built, each spoke is individually prepped using spoke-tite and tensioned by hand, ensuring a wheelset that remains strong & true for many years to come. Many other wheel builders do not go to such lengths to ensure a perfect wheel build. Together, our team has over 120 combined years of experience with bicycles and we stand by every product we sell.
Chris King ISO LD Gen 1, 100 x 15mm Front Axle
$73.50
Axle conversion kits are required for converting your current hub to be used on various other axle platforms. - Large Diameter (LD) Axle for 15mm forks - Fits Chris King ISO LD Front Hubs (15mm and 20mm only) with serial numbers starting with 171 ONLY - Allows you to run a 15mm Axle on Chris King ISO LD Front Hubs - All axles require an adjusting clamp for installation
Chris King ISO Disc Stan's Arch EX 26
$919.99 - $1,629.93
Use our Stan's Arch EX Chris King ISO Disc custom wheelset builder to build your ultimate Arch EX Chris King wheelset. With this custom wheelset builder, you'll be able to customize multiple aspects of this wheelset, such as rim size (26", 29er" 650b / 27.5") & color, spoke type & color, Chris King Hub axle configuration, nipple color, and so on. With this Stan's Arch EX Chris King wheelset builder, you'll have complete control over the final design of your Chris King custom wheelset, giving you the ability to truly build the ultimate unique wheelset that you've always dreamed of! Chris King ISO Disc Hubs! Known throughout the bicycling industry for their superior performance and extreme durability, Chris King is an industry leader in high performance, high engagement hubs! Designed, hand crafted & machined right here in the United States, Chris King leads the market with their advanced hub designs. Chris King hubs offer some of the fastest engagement hubs around, with the pawls engaging every 5 degrees. This means that for ever 360 degrees of revolution, a Chris King hub is going to engage 72 times. One would think that such high technology would come with a weight penalty; however Chris King has engineered the design of their hubs to be some of the lightest around! Custom Hand Built Wheelsets Richards Bicycles builds some of the best hand built wheelsets in the bicycling market. Each wheel or wheelset that we sell is hand built by our professional wheel builder, who has been building wheels with us for over 25 years. He has more experience building top of the line wheels than almost any other person in the industry, and we guarantee our wheel builds to be the best that you can find. When your wheelset is built, each spoke is individually prepped using spoke-tite and tensioned by hand, ensuring a wheelset that remains strong & true for many years to come. Many other wheel builders do not go to such lengths to ensure a perfect wheel build. Together, our team has over 120 combined years of experience with bicycles and we stand by every product we sell.
Chris King ISO Disc Stan's Crest 26
$919.99 - $1,629.93
Use our Stan's Crest Chris King ISO Disc custom wheelset builder to build your ultimate Crest Chris King wheelset. With this custom wheelset builder, you'll be able to customize multiple aspects of this wheelset, such as rim size (26", 29er" 650b / 27.5") & color, spoke type & color, Chris King Hub axle configuration, nipple color, and so on. With this Stan's Crest Chris King wheelset builder, you'll have complete control over the final design of your Chris King custom wheelset, giving you the ability to truly build the ultimate unique wheelset that you've always dreamed of! Chris King ISO Disc Hubs! Known throughout the bicycling industry for their superior performance and extreme durability, Chris King is an industry leader in high performance, high engagement hubs! Designed, hand crafted & machined right here in the United States, Chris King leads the market with their advanced hub designs. Chris King hubs offer some of the fastest engagement hubs around, with the pawls engaging every 5 degrees. This means that for ever 360 degrees of revolution, a Chris King hub is going to engage 72 times. One would think that such high technology would come with a weight penalty; however Chris King has engineered the design of their hubs to be some of the lightest around! Custom Hand Built Wheelsets Richards Bicycles builds some of the best hand built wheelsets in the bicycling market. Each wheel or wheelset that we sell is hand built by our professional wheel builder, who has been building wheels with us for over 25 years. He has more experience building top of the line wheels than almost any other person in the industry, and we guarantee our wheel builds to be the best that you can find. When your wheelset is built, each spoke is individually prepped using spoke-tite and tensioned by hand, ensuring a wheelset that remains strong & true for many years to come. Many other wheel builders do not go to such lengths to ensure a perfect wheel build. Together, our team has over 120 combined years of experience with bicycles and we stand by every product we sell.
Chris King ISO LD Front Hub
$241.00
For riders who need the legendary rolling quality of Chris King hubs for use in the high-impact demands of enduro, DH, freeride, and slopestyle, Chris King developed the ISO Large Diameter (LD) front hub. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with the Chris King Hub Service Tool - Responsibly lightweight - Easily convertible with a new axle between a 15mm, 20mm or a Lefty LD thru axle
Chris King R45 Disc Front Hub
$241.00
The R45 100x12mm Disc front hub combines the small, lightweight and fast-rolling design of the R45 front hub with ISO disc mount compatibility. This provides you with the legendary rolling speed of Chris King's exclusive bearings paired with the incredible stopping power of disc brakes. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with the R45 Hub Service Tool - Chris King's lightweight solution for top caliber racing - Ceramic bearing upgrade available
Chris King ISO Disc Mavic 819 Disc 26
$929.99 - $1,434.93
Use our Mavic 819 Disc Chris King ISO Disc custom wheelset builder to build your ultimate 819 Disc Chris King wheelset. With this custom wheelset builder, you'll be able to customize multiple aspects of this wheelset, such as spoke type & color, Chris King Hub axle configuration, nipple color, and so on. With this Mavic 819 Disc Chris King wheelset builder, you'll have complete control over the final design of your Chris King custom wheelset, giving you the ability to truly build the ultimate unique wheelset that you've always dreamed of! Chris King ISO Disc Hubs! Known throughout the bicycling industry for their superior performance and extreme durability, Chris King is an industry leader in high performance, high engagement hubs! Designed, hand crafted & machined right here in the United States, Chris King leads the market with their advanced hub designs. Chris King hubs offer some of the fastest engagement hubs around, with the pawls engaging every 5 degrees. This means that for ever 360 degrees of revolution, a Chris King hub is going to engage 72 times. One would think that such high technology would come with a weight penalty; however Chris King has engineered the design of their hubs to be some of the lightest around! Custom Hand Built Wheelsets Richards Bicycles builds some of the best hand built wheelsets in the bicycling market. Each wheel or wheelset that we sell is hand built by our professional wheel builder, who has been building wheels with us for over 25 years. He has more experience building top of the line wheels than almost any other person in the industry, and we guarantee our wheel builds to be the best that you can find. When your wheelset is built, each spoke is individually prepped using spoke-tite and tensioned by hand, ensuring a wheelset that remains strong & true for many years to come. Many other wheel builders do not go to such lengths to ensure a perfect wheel build. Together, our team has over 120 combined years of experience with bicycles and we stand by every product we sell.
Chris King ISO SD 100 x 15mm Front Axle
$73.50
Axle conversion kits are required for converting your current hub to be used on various other axle platforms. - Small Diameter (SD) Axle for 15mm forks - Fits Chris King ISO SD Front Hubs (9mm and 15mm only) - Takes existing 9mm QR Chris King ISO Hubs and allows you to run a 15mm Thru Axle - All axles require an adjusting clamp for installation
Chris King R45 Cassette Lockring
$32.00
Designed with today’s taller, double-digit cog stacks in mind, Chris King's R45 cassette lock rings feature longer threads to provide secure engagement with the hub driveshell. A Chris King cassette lock ring is the perfect complement to any Chris King hub, or for anyone looking to add a dash of King performance to other manufacturer’s compatible rear hubs. They are available for both 11 and 12 tooth small cogs, as well as Shimano or Campagnolo hubs.
Page 1 of 2 Next page