Bicycle Safety

- Impact-absorbing SmartFlex pads shield your hips from unexpected impacts - Silicone grippers on the back of each pad assure they stay in place - Ventilated pads - Pads are waterproof and will not absorb water or sweat

- Ventilated back pad is flexible and removable. Layers of SmartFlex and multidensity foam offer exceptional comfort and protection - SmartFlex Stretch padding on shoulder protects during crashes and falls - SmartFlex Stretch padding on chest for protection against falls and roost debris - CE 1621-2 certification - Full-length front locking zipper with reinforced seams - Breathable, moisture wicking mesh fabric offers comfort, exceptional performance, fit and long-lasting durability

The SURPASS from 100% is your ultimate choice for no compromise, all-in-one coverage. Featuring a Level 2 impact rating, this gear really does everything well—light enough for cross country, protective enough for downhill, and breathable enough for all your pedaling needs. - Rubberized ventilated outer skin - Strategically placed perimeter embossed foam padding with ventilation - Fully ventilated plastic protective cup with high impact absorption - Pre-curved chassis for attack position - Internal elastic flex joint maintains chassis compression during pedaling - Tacky silicone elastic webbing to prevent slippage - Thigh cinch for customizable fit and security - Forearm cinch for added security - Impacted Tested with Maximum Level 2 Protection

Proven MIPS Coverage for Superior Open-Face Performance The Speedframe MIPS Helmet has premium features usually meant for much more expensive helmets. A MIPS liner, goggle compatible 3-position visor, and our 360-degree fit make the Speedframe one of the best values in an open-face helmet. Add in the legendary aggressive Fox design DNA, and you have one of the most shred-ready trail helmets in the market today. Features - Proven MIPS impact protection system reduces rotational forces in a crash - Removable, washable moisture-wicking comfort liner - Optimized venting with channeled, in-molded EPS provides efficient cooling - Goggle compatible, 3-position adjustable visor - 360 Fit System allows you to dial in your perfect fit every ride - Weight: 360g Sizing - Small = 51 – 55cm - Medium = 55 – 59cm - Large = 59 – 63cm Certifications - CPSC - EN 1078 - AS/NZS 2063

- Optimized venting with channeled, in-molded EPS provides efficient cooling - Goggle compatible, 3 position adjustable visor - Removable, washable moisture wicking liner - 360°Fit System allows you to dial in your perfect fit every ride

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - Measures 11" wide by shifters/brakes

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts and is designed to work with drop bar style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - Opening measures 9" across

One helmet all road. The MET Allroad Mips is made for those who enjoy spending time on the saddle, whether on the tarmac or on gravel routes. Sporty on one side, comfy on the other. It's exceptionally lightweight and secure thanks to MET's distinguishing design. Perfect for your next bikepacking adventure. Featuring the MIPS-C2 brain protection system, the MET Allroad Mips is able to slide relative to the head in the case of a crash, redirecting damaging rotational motion. - In-mold polycarbonate shell with EPS liner - MIPS-C2 Brain Protection System - Snap in/out visor - Safe-T E-DUO Fit System - Vertical adjustment and ponytail-compatible - Integrated rear LED light - Reflective rear stickers - Internal air-channeling - Hand washable comfort pads - Adjustable cam divider - Certifications: CE; AS/NZS

Inspired by our award-winning professional cycling helmet the Trenta, the MET Vinci MIPS exceeds the standards of comfort and safety, delivering an unmatched price-performance ratio. Featuring the MIPS-C2 brain protection system, the Vinci is able to slide against the head in the case of a crash, redirecting damaging rotational motion. The Vinci is also exceptionally lightweight and extremely comfortable to wear. The internal air-channeling works in synergy with the exhaust ports, maximizing ventilation. - In-mold polycarbonate shell with EPS liner - MIPS C2 rotational management system is engineered to add protection in case of certain impacts - Exceptionally comfortable and secure thanks to the refined internal shape - MET Safe-T DUO Fit System - 360° head belt and vertical adjustments offer a customized fit - Straps with adjustable divider maximize aerodynamics and comfort - Comfort pads are hand-washable - 16 vents are internally engineered for air channeling to improve ventilation and comfort - Reflective rear decals to enhance visibility in low-light conditions - Sunglasses ports to securely dock sunglasses when climbing or resting - Certifications CE; AS/NZS Sizing: - Small = 52 – 56cm - Medium = 56 – 58cm - Large = 58 – 61cm

- Supercharged 1:30 to 95 hour run time - Extremely powerful 1,500 lumens in an astonishingly compact and stylish form. - Cycling Tuned Optics throws a long range, extra wide beam to cover road and mountain biking - Daytime visible flashes make you stand out on busy streets. - Two-button design lets you fine tune the brightness and flash speeds to your cycling needs. - Expand run times beyond factory default settings by fine tuning the brightness modes and flash speeds. - 9 lighting modes for day and night use - SteadyPulse mode alerts motorists with attention grabbing pulses while its overlapping steady beam constantly lights your way at night - DayLightning flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets - 252 grams - IP67 water resistant for use in all weather conditions - USB rechargeable with 5 hours recharging time - Designed, engineered, and assembled in the USA.

A powerful and compact bike light set with multiple flash patterns for daytime visibility from up to 2km away. The ultimate daytime running light set Be seen and ride safe with a compact and powerful set of front and rear daytime running lights. The all-new Flare RT is smaller, more powerful, and features a longer battery life. The Ion 200 RT packs the same technology into a 200 Lumen front bike light. Both lights are USB rechargeable, include easy-to-mount brackets, and feature a distinctive flash setting that is visible from up to 2 km away. Product details - Specifically designed focus, flash, and range for ultimate daytime visibility - Flare RT provides ultimate visibility for any road, city, or path - Ion 200 RT provides 200 Lumens of visibility via high-power CREE LED bulbs - Integrated light sensor auto-adjusts brightness to your environment - Connect with Garmin and Bontrager ANT+ devices for always on, battery status, and wireless control - Easily attaches to your handlebars, helmet, or bike mount - Includes Ion 200 RT, Flare RT, Quick Connect Mounts, and mini USB charging cable

For days when the mercury plugs below 15 degrees (-9°c), Sturmfist 4 provides unmatched performance by combining superior fabrics and insulation technologies. - Water/wind-resistant shell on back of hand - Water-resistant leather on palm  - 300g Polartec Alpha insulation - Aerogel insulation in palms protects against conductive heat loss

Sturmfist 4 combines high-tech materials and proven design for the best winter bike gloves out there. Wind-and-water-resistant shell fabric, Primaloft insulation with aerogel, a leather palm, and drawstring gauntlet closure make frigid winter rides easier. Stay warm with Sturmfist 4. - Wind- and water-resistant soft shell outer - Goatskin leather palm - Primaloft 8 oz Gold Insulation with Cross Core Aerogel technology - Primaloft Gold Insulation Eco with Grip Control - Merino wool blend lining made from 35% recycled materials - Drawstring gauntlet cuff closure - Conductive synthetic leather on thumb and index fingers is touch-screen friendly - Pre-curved fingers for natural hand position on handlebars

The Bluegrass Skinny D3O® knee pads are the go-to choice for our rider's shredding stages of the Enduro World Series. Breathable fabric and light overall weight ensure they can keep pedaling hard to the end of the ride. - D3O® Technology - Protectors compliant with EN 1621-1, Level 1 - Silicone grippers - Extended sleeve - Strong, durable Kevlar fabric - Breathable Laminated fabric

If relentless performance and style is what you're after, then you'll get it with the Seyen MIPS. Its slim design, luxurious fit, and highly-adjustable fit system will let you focus on what you do best, the ride. The Seyen MIPS combines a touch of European flair with slightly deeper coverage and high-performance features—all tucked into a very slim design. The outer shell is molded from a tough polycarbonate that's fused permanently to the EPS foam liner using our In-Mold construction process to enhance durability and ventilation without excess bulk. The fit is luxurious and secure, thanks to our highly-adjustable Roc Loc 5 Air MIPS system that allows you to customize fit/feel for great stability and long-range comfort. Another benefit is integrated MIPS which can provide an added measure of protection from rotational forces in the event of an angled impact.

- A Kydex pierce-proof layer and a removable D3O LP1 pad provide certified impact protection. - Durable TPU skid plate for sliding during crashes along with a ripstop knee cover for abrasion resistance. - Stretch mesh rear panel with an integrated perforated elastic above the calf for a secured fit. - Ariaprene body fabric is highly breathable and a sustainable alternative to neoprene. - Foam padded side walls offer additional coverage. - Silicone gripper print inside top opening to prevent slippage. - Unisex size range.

The Launch Elite Elbow Guards offer an excellent combination of impact-absorbing protection with a fit that ensures mobility while riding. The CE-certified D3O LP1 inserts provide world-leading impact protection, while the engineered SuperFabric skid panels deliver maximum durability and flexibility. Lightweight, and constructed in a minimal sleeve style, they'll bump up the comfort and flexibility while on the bike without sacrificing protection from trail hazards. Large elastic gripper panels help keep the guards in place while riding or during impact, and the material features an antimicrobial treatment to reduce odor-causing microbes. Shred with confidence with the protection of our Launch Elite Elbow Guards.

Photochromic replacement lens for Vue Goggles. Key Features: - Offers UVA & UVB protection - Pre-curved design offers superior optical clarity - Meets ANSI Z87.1-2010 and EN1938:2010 standards for impact resistance - Anti-fog treated - Photochromic lens

See more with pro-level Vue dirt bike goggles The Vue Withered Goggles ensure the widest field of view possible and reduce distractions from the side. They feature a pre-curved, injection-molded polycarbonate lens for distortion-free optical clarity and increased impact resistance. For lens swapping and removal, the Vue Goggles use our TruLock system. The system's turn-to-release tabs allow you to change lenses in seconds. Rounding out these pro-level goggles are a 45mm strap, a high-flow 360 venting system that keeps you cool and reduces fogging, and a comfortable 3-layer foam to keep sweat out of your eyes. Specifications: - 45 mm roll off canister attached to the lens - Wide viewport provides exceptional peripheral vision - Hard lens provides optical clarity and protects against roost impact - Easy lens swap system - 360 venting optimizes airflow for cooling and reduced fogging - 45 mm strap with backing silicone stripe provides superior helmet grip

The SURPASS from 100% is your ultimate choice for no compromise, all-in-one coverage. Featuring a Level 2 impact rating, this gear really does everything well—light enough for cross country, protective enough for downhill and breathable enough for all your pedaling needs. - Rubberized ventilated outer skin - Strategically placed perimeter embossed foam padding with ventilation - Fully ventilated plastic protective cup with high-impact absorption - Pre-curved chassis for attack position - Internal elastic flex joint maintains chassis compression during pedaling - Tacky silicone elastic webbing to prevent slippage - Thigh cinch for customizable fit and security - Calf cinch for added security - Impacted Tested with Maximum Level 2 Protection

Essential protection and open-face performance helmet. The Speedframe Helmet features the iconic styling of Fox with plenty of features to keep you safe on the trail. Add in the legendary aggressive Fox design DNA, and you have one of the most shred-ready MTB helmets in the market today. Key Features: - Mips® equipped - Goggle-compatible, 3-position visor - 360° Fit System Specifications: - Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Optimized venting with channeled, in-molded EPS provides efficient cooling - Goggle-compatible, 3-position adjustable visor - Removable, washable moisture-wicking liner - 360° Fit System allows you to dial in your perfect fit, for every ride

Proven Mips™ coverage for superior open-face performance. The Speedframe Helmet has premium features usually meant for much more expensive helmets. The Mips® impact protection is designed to reduce rotational motion and redirect forces from your brain should you crash, while the removable and washable moisture-wicking comfort liner means you can always keep this helmet fresh and free of sweaty ride stink. Key Features and Specifications: - Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Optimized venting with channeled, in-molded EPS provides efficient cooling - Goggle-compatible, 3-position adjustable visor - Removable, washable moisture-wicking liner - 360° Fit System allows you to dial in your perfect fit, in every ride Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel Materials: 38% EPS, 22% nylon, 34% PC, 4% polyester, 3% POM

FOR MORE SAFETY The ABUS MoDrop MIPS can handle any terrain and any riding style and always leaves you wanting more. The mountain bike helmet is the best companion for big mountain days, experiences on the trail or just leisurely family outings. Equipped with our MTB-specific adjustment system and TriVider webbing distributors, this helmet offers many features that make it more comfortable to wear. The height-adjustable, visor-like visor protects you from hanging branches when riding downhill. In the event of a fall, it can also prevent direct impact with the face. Additional safety is provided by the MIPS impact protection. This is intended to protect the brain, especially if the cyclist's head hits the ground at an angle during a fall. In a fall, the brain is exposed to strong rotational movements that can lead to severe brain injuries. With MIPS, a movable low-friction plastic shell is integrated into the helmet to ensure that rotation is reduced and the head is better protected. - Multi-Shell In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Laterally adjustable, non-slip TriVider webbing distributor - Molded lower shell for added durability - QUIN ready—easy upgrade with the separately available QUIN chip for fall detection - GoggFit: Device that allows a pair of goggles to be fixed to the helmet when the athlete doesn't need them while riding - MIPS: Impact protection that protects the brain, especially when the cyclist's head hits the ground at an angle during a fall. - Ventilation: excellent ventilation for this helmet type due to 6 air inlets and 8 air outlets - Bug mesh: thorough protection against insects

PROFESSIONAL TECHNOLOGY FOR BEGINNERS The Viantor is the high-quality and lightweight helmet for beginners in which we have used many proven technologies from the professional sport. Let yourself be convinced by a high-quality and safe helmet, which has the advantages of a professional race helmet. For maximum safety, the Viantor has the ActiCage structural reinforcement integrated in the EPS. It provides maximum protection while ensuring optimal ventilation and extreme comfort. The ActiCage allows for large ventilation openings without compromising on the helmet's safety. Due to its ponytail compatibility, the Viantor from ABUS is the first choice for riders with long hair. Multi Shell In-Mold for durable bonding of multi-part outer shell and shock-absorbing helmet material (EPS) - Ponytail compatibility: Helmet well suited for braided hairstyles - Good ventilation with 4 air inlets and 14 air outlets connected with flow channels - Semi-enclosing plastic ring connected to the adjustment system for optimum stability and form-fitness - ActiCage: Structural reinforcement integrated in the EPS to optimize stability - Zoom Ace: Fine-adjustable adjustment system with non-slip adjustment wheel for individual fit

A compact and powerful light set designed to help riders see and be seen on the street, path, or trail. Ion Comp R provides compact power to help illuminate the street, path, or trail, and Flare R City rear tail light helps you stand out. Both are USB-rechargeable Daytime Running Lights that feature distinctive focus, flash, and range flash patterns designed to boost visibility. Product details - Dedicated Daytime Running Light modes on both lights designed for increased visibility - Ion Comp R provides a warm, wide 700-lumen beam for confident night riding and a great depth of field - Flare R City delivers a wide, 35-lumens beam that's ideal for city use - DRL-specific focus, flash, and range flash patterns offer ultimate daytime visibility - Blendr-compatible for integrated mounting on compatible Blendr stems, helmets, and helmet mounts - USB-rechargeable with included micro USB cable

- Made for the e-xtreme - Hard shell gives protection and ability to slide on hard surfaces - Top and bottom adjustable hook and look fit-strap for customized comfort and security - Rugged Armortex (kevlar blend material) pads covering flights abrasion - Zipper for easy on and off - Active Airflow: 4 layer ventilation system - Technial back mesh for breathability - CE 1621-1 certified to ensure outstanding protection

Lezyne Ebike Classic Stvzo E800: A highly advanced StVZO certified e-bike cycling headlight. This light is housed in a beautifully machined aluminum body with computerized thermal management to maximize lumen output efficiency. Cutting-edge programming gives this light an innovative high beam/low beam system controlled by a remote switch that lets the user easily toggle between two modes—500 lumens or 800 lumens—on-the-go via a handlebar mounted button. It comes with an integrated 130 cm (51.2 inches) cable that connects to the e-bike’s motor/battery system. Two mounting options are also included—one Composite Matrix front mount and one machined aluminum fork mount. Compatibility: 11 – 15v input, 7.5w LB / 13w HB. Download the manual below for further installation and compatibility details. - 500 lumen front ebike light with 800 lumen high beam mode - STVZO optimized lens - 130cm cable - Aluminum fork mount

The Sturmfist 4 LTR are our bike gloves for winter riding on days when the mercury plunges below 15 degrees F (-9 degrees C). These gloves use superior fabrics and insulation technology to provide unmatched warmth and comfort for your hands. - Durable water-resistant (DWR) distressed goat leather around the hand - Wind- and water-resistant soft shell cuff - Primaloft 8 oz Gold insulation with Cross Core Aerogel technology on back of hand - Primaloft ECO needle insulation with grip control on palm - Merino wool blend lining made from 35% recycled materials - Drawstring cuff closure

The Sturmfist 4 LTR are our bike gloves for winter riding on days when the mercury plunges below 15 degrees F (-9 degrees C). These gloves use superior fabrics and insulation technology to provide unmatched warmth and comfort for your hands. - Durable water-resistant (DWR) distressed goat leather around the hand - Wind- and water-resistant soft shell cuff - Primaloft 8 oz Gold insulation with Cross Core Aerogel technology on back of hand - Primaloft ECO needle insulation with grip control on the palm - Merino wool blend lining made from 35% recycled materials - Drawstring cuff closure

We developed the Bluegrass Solid D3O® elbow pads to be as adjustable as possible to avoid the pain of arm pump without losing stability during the ride. With D3O® shells and extra soft pads at the sides, the Solid D3O® provides protection and comfort. - Protectors compliant with EN 1621-1, Level 1 - D3O® Technology - Side soft pads - Extended sleeve - Silicone grippers - Top and bottom straps - Strong, durable Kevlar fabric - Breathable Air Mesh fabric

The Agent knee pad 3D-molded foam insert hardens on impact for confident protection, bolstered by additional side padding for 360-degree knee protection. These pads stay put thanks to the adjustable thigh and calf straps enhanced with silicone gripper elastic. The Agents are built with a pre-curved ergonomic fit for total comfort plus an open back for cooling airflow, which we know you'll appreciate all the way up and down. - 3D shaped midweight CE certified knee protector - CE certified to EU 2016/425 (CRITT protocol VTT-007) - Perforated and breathable construction - DK Impact energy-absorbing foam technology - Polygiene Odor Control technology - Lateral and medial side protection - Interior patella support and back of calf compression for a secure fit - Adjustable thigh strap - Silicone gripper elastic

As one of the most sophisticated urban helmets in the line, the Evoke MIPS has a sleek In-Mold shell to help keep it lightweight, and the adjustable eye shield seals out wind and weather whenever conditions demand it. A Roc Loc City MIPS fit system makes fit and stability adjustments almost effortless and integrates seamlessly with MIPS technology, which helps to reduce rotational forces and provide more protection in certain impacts. Thoughtful details include reflective accents and a lock port for securing the helmet with your bike when you're on the move. And with the removable "be seen" LED rear lighting included, you get flexibility to fit your needs and your budget.

Roll-off, see more Never lose sight of the track with the Vue Roll-Off Goggles, allowing you to keep your vision clear with the 45 mm roll-off canister attached to the lens. Like all Vue Goggles, the Vue Roll-Off Goggles ensure the widest field of view possible and reduce distractions from the side. They feature a pre-curved, injection-molded polycarbonate lens for distortion-free optical clarity and increased impact resistance. Specifications: - Wide viewport provides exceptional peripheral vision - 45 mm roll-off canister attached to the lens - Injected polycarbonate lens is designed to provide optical clarity and protect against roost impact - TruLock system makes lens replacement quick and easy - Soft TPU faceplate forms to rider's face for improved comfort - ABS/nylon outer frame to resist roost and increase durability - 360 venting optimizes airflow keeping the rider cool and reduces fogging - 45 mm strap with backing silicone stripe provides superior helmet grip - 3-layer molded foam wicks sweat and provides a comfortable fit - Offers UVA and UVB protection - Pre-curved design offers superior optical clarity - Meets ANSI Z87.1-2010 and EN1938 standards for impact resistance - 28% Tr90, 23% polyester, 21% Tpu, 18% polycarbonate, 6% polyurethane, 4% nylon

The new Agent biking Knee Pads feature impact-absorbing 3D-molded CE-certified foam in an easy-on/off design. This midweight pad opens all the way up, eliminating the need to take off your shoes, so you can easily put 'em on at the top without holding up the crew. - 3D shaped midweight CE certified knee protector - CE certified to EU 2016/425 (CRITT protocol VTT-007) - Easy on/off attachment straps (don't have to take off shoes) - Perforated and breathable construction - DK Impact energy-absorbing foam technology - Polygiene Odor Control technology - Lateral and medial side protection - Interior patella support and back-of-calf compression for a secure fit - Adjustable thigh & calf straps - Silicone gripper elastic

- Supercharged 1:15 to 85 hour run time. - Extremely powerful 1,800 lumens in the most compact and stylish form. - Cycling Tuned Optics throws a long range, extra wide beam to cover road and mountain biking - Daytime visible flashes make you stand out on busy streets - Two-button design lets you fine tune the brightness and flash speeds to your cycling needs. - Expand run times beyond factory default settings by fine tuning the brightness modes and flash speeds - 9 lighting modes for day and night use - SteadyPulse mode alerts motorists with attention grabbing pulses while its overlapping steady beam constantly lights your way at night. - DayLightning flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets - 252 grams - IP67 water resistant for use in all weather conditions - USB rechargeable with 5 hours recharging time - Designed, engineered, and assembled in the USA

- High-quality PREMIUM design - AWARD-WINNING light distribution technology - Easy-to-use LCD DISPLAY shows various information to the user - Extensive side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - 80 LUX - 6 Modes - Run time on Eco = 24 hrs - Run time on High Steady = 3 hrs

Offering finely tuned trail protection, this trail and enduro mountain bike helmet gives exceptional coverage and features POC's innovative, patent-pending technology to minimize neck injury. Built to ride, all day. Features: - SPIN technology (Shearing Pad INside)—our patent-pending silicone-pad-technology system - Fully wrapped unibody shell to enhance durability and structural integrity - 360° size-adjustment system for the most precise and secure fit - Breakaway visor - Lightweight and well-ventilated Breakaway visor - The novel breakaway visor will snap off the helmet in an impact, thereby minimizing the impact forces that are transmitted to the neck. - The lightweight, well-ventilated Axion SPIN has extended protection zones around the temples and the back of the head for extra coverage where it is most needed.

THE BEST OF BOTH WORLDS The Hyban 2.0 combines a particularly robust hard shell with a huge air intakes. In combination with the integrated, bright LED rear light, the Hyban 2.0 is the perfect everyday helmet for the city. - ABS hard shell: Robust helmet made of EPS foam and injection molded outer shell - High visibility: High visibility thanks to powerful integrated LEDs - Bug mesh: Full protection from insects - Ponytail compatibility: Perfect fit for people with long hair - Full-ring: Adjustable ring connected to adjustment system enclosing all of the head - Excellent ventilation with 5 air inlets and 8 air outlets - Zoom Ace Urban: Finely adjustable adjustment system with handy adjustment wheel for customisable fit - Large, highly mounted and integrated LED tail light with 180° visibility

The MonTrailer offers this increased need for protection and a multitude of well thought-out features for off-road use. This mountain bike helmet is light, extremely well ventilated and extremely comfortable and is perfect for racing or the everyday trail tour. - In-Mold for a durable connection with the outer shell with shock-absorbing helmet material (EPS) - Good ventilation with 5 air inlets and 7 air outlets connected with flow channels - Semi-enclosing plastic ring connected to the adjustment system for optimum stability and form-fitness - Bottom edge protects the helmet from external influences - ActiCage, a structural reinforcement integrated in the EPS to optimise stability - Zoom Ace adjustment system with non-slip adjustment wheel for individual fit - GoggFit ensures safe positioning of glasses and provides storage space when not in use - The transparent visor gives the wearer good all-round vision without having to take their eyes off the trail

The most technically advanced winter cycling pogie, Cobrafist puts unrivaled comfort and control into your hands for expedition in sub-zero conditions. - Two zippered vents for temperature regulation 400g synthetic insulation - Inner pockets for stowage - Bar-end plug attachment - Hook and loop bar closure with integrated donut - Elastic drawstring wrist closure - Reflective graphics - OUTER SHELL: Tear-resistant nylon - LINING: 68D lightweight poly - SUGGESTED TEMPERATURE RANGE: 0°F (-18°C) to 15°F (-9°C) - SIZE: One size (fits flat bars 640mm and wider)

Built to Perform Built with the same core design principles as the pro-level Z20, the Stratus combines lightweight aero efficiency with cutting-edge comfort technologies. The shape was refined for all-around road performance - ventilated for long climbs but still fast for the flats - and the integrated Float Fit system offers comfort and security with a streamlined fit and an oversized dial that's easy to adjust with one hand. The Overbrow Ventilation system pulls cool air in through the front and pushes it through an air-channel matrix to reduce overheating. And thanks to the adjustable No-Twist Tri-Glides, the straps stay flat and properly positioned no matter how hard you're hammering. This model also includes MIPS (Multi-Directional Impact Protection System) for added protection in certain types of impacts. Specs - MIPS: MIPS stands for multi-directional impact protection system, which is a leading slip-plane technology inside the helmet designed to reduce rotational forces that can result from certain impacts. - Construction: Fusion in-mold polycarbonate shell - a process pioneered by Bell bonds the helmet's outer shell to the eps foam liner to create a sturdier helmet. Lightweight internal polycarbonate roll cage. - Sport: Cycling - Number of vents: 18 vents - Interior/liner type: Sweat guide pad design pulls moisture away from the brow pad and away from eyewear. - Ventilation type: Overbrow ventilation features intake ports on the brow of the helmet to usher in cool air and push it through the air-channel matrix for full-head ventilation. - Fit System: Float Fit - a minimalist, lightweight fit system with an easy-to-turn rubber over-molded dial for adjustments (integrated with MIPS) - Product Weight: 300 grams (size m) - Certification: CPSC bicycle

Light and fast meets cool comfort for your most heated battles on the road. From long climbs to finishing sprints, Stratus helps you stay at the front of the pack. Built to Perform Built with the same core design principles as the pro-level Z20, the Stratus combines lightweight aero efficiency with cutting-edge comfort technologies. The shape was refined for all-around road performance—ventilated for long climbs but still fast for the flats—and the integrated Float Fit system offers comfort and security with a streamlined fit and an oversized dial that's easy to adjust with one hand. The Overbrow Ventilation system pulls cool air in through the front and pushes it through an air-channel matrix to reduce overheating. And thanks to the adjustable No-Twist Tri-Glides, the straps stay flat and properly positioned no matter how hard you're hammering. This model also includes MIPS (Multi-Directional Impact Protection System) for added protection in certain types of impacts. [Availability, certification, color, and pricing may vary per region. If outside of the USA, please check with your authorized local dealer for more information.] - INTEGRATED MIPS—Integrated MIPS (Multi-Directional Impact Protection System) is designed to reduce rotational forces that can result from certain impacts. By integrating the MIPS slip plane into the retention system, we are able to reduce complexity and weight for a compact, better ventilated helmet that fits more closely to the head. - FLOAT FIT—A minimalist, lightweight fit system with an easy-to-turn rubber overmolded dial for adjustments (integrated with MIPS). - OVERBROW VENTILATION—Overbrow Ventilation features intake ports on the brow of the helmet to usher in cool air and push it through the air-channel matrix for full-head ventilation - NO-TWIST TRI-GLIDES—Quick-adjust fasteners that help keep straps flat and properly positioned - SWEAT GUIDE—Sweat Guide pad design pulls moisture away from the brow pad and away from eyewear. Complies with the US CPSC Safety Standard for Bicycle Helmet for Persons Age 5 and Older

Built To Perform Built with the same core design principles as the pro-level Z20, the Stratus combines lightweight aero efficiency with cutting-edge comfort technologies. The shape was refined for all-around road performance—ventilated for long climbs but still fast for the flats - and the integrated Float Fit system offers comfort and security with a streamlined fit and an oversized dial that's easy to adjust with one hand. The Overbrow Ventilation system pulls cool air in through the front and pushes it through an air-channel matrix to reduce overheating. And thanks to the adjustable No-Twist Tri-Glides, the straps stay flat and properly positioned no matter how hard you're hammering. This model also includes MIPS (Multi-Directional Impact Protection System) for added protection in certain types of impacts. Specs - MIPS-equipped: MIPS stands for Multi-directional Impact Protection System, which is a leading slip-plane technology inside the helmet designed to reduce rotational forces that can result from certain impacts. - Construction: Fusion in-mold polycarbonate shell - a process pioneered by Bell bonds the helmet's outer shell to the EPS foam liner to create a sturdier helmet, lightweight internal polycarbonate roll cage - Number of vents: 18 - Interior/liner type: Sweat guide pad design pulls moisture away from the brow pad and away from eyewear - Ventilation type: Overbrow ventilation features intake ports on the brow of the helmet to usher in cool air and push it through the air-channel matrix for full-head ventilation - Fit system: Float Fit - a minimalist, lightweight fit system with an easy-to-turn rubber overmolded dial for adjustments (integrated with MIPS) - Weight 300 grams (size M) - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 62cm

The Bluegrass Solid D3O® knee pads are enhanced with D3O® shells and extra soft pads at the sides to enhance protection and comfort. Built for the hardest lines, we used breathable and durable fabrics, such as Air Mesh and Kevlar, for the construction. - D3O® Technology - Protectors compliant with EN 1621-1, Level 1 - Side soft pads - Extended sleeve - Silicone grippers - Top and bottom straps - Zip closure - Strong, durable Kevlar fabric

The Giro Cinder MIPS provides all the features an avid road rider wants in a lightweight package. The design is inspired by the classic aesthetic of their premium Synthe helmet, offering similar performance and style. Key features include the Roc Loc 5 fit system, which allows you to easily dial in fit tension and adjust vertical position with a single hand. Air-FX padding offers comfort on your longest rides, and the helmet is equipped with MIPS to redirect impact energy, providing more protection in certain impacts.

Oakley engineering takes performance to the next level and brings style along for the ride. Flak 2.0 offers a standard size frame with enhanced lens coverage, and every millimeter of the lens is optimized with High Definition Optics in a ruggedly durable yet lightweight design. Designed to push your limits with patented XYZ Optics for razor-sharp clarity and secure grip of Unobtanium. - Lightweight O Matter frame material with ellipse metal icon accents - Unobtainium earsocks and nosepads for increased comfort and performance - 8.75 base lens geometry with HDO - Protective soft vault included

As the eyewear of choice for world champion cyclist Peter Sagan, the Speedcraft is fully loaded with 100%'s most advanced technology for the ultimate in sports performance. 100%'s signature lens with its cylindrical shield features 360-degree visibility in the riding position. Ultra-grip rubber nose and temple pieces help provide all-day comfort while the lower air scoops increase ventilation and reduce moisture on the lens. - High-impact resistant and lightweight polycarbonate lenses - 5-base cylindrical shield lens for increased peripheral view and protection - 360-degree visibility for unobstructed views and optimal field of vision - Interchangeable scratch-resistant lenses provide 100% UV protection - Lower air scoops to increase ventilation while reducing moisture on the lens - HYDROILO lens treatment repels water, dirt, and oil - Temple arm scoops to manage moisture - Shatterproof and lightweight Grilamid TR90 frame - Ultra-grip rubber nose pads and tips for a secure fit no matter how much you sweat

The MET Estro MIPS is a versatile road helmet ready for your longest day on the bike. As comfortable as a top-of-the-line helmet, its design is widely open to maximize ventilation at low speeds. With 26 vents, 17 of which are inlets and 9 are exhaust holes, all of them work in synergy with the internally engineered air channeling system to ensure maximum ventilation. The Estro MIPS is also exceptionally comfortable. The 360° head belt in the MET Safe-T Upsilon retention system ensures that there will be no pressure points on the skull, and its internal shape is welcoming for almost all different shaped heads. Featuring the MIPS-C2 brain protection system, the MET Estro MIPS is able to slide against the head in the event of a crash, redirecting damaging rotational motion. MIPS is a brain protection system—engineered to add protection to the standard construction of helmets in case of certain impacts. The MIPS Brain Protection System (BPS) is attached inside the helmet, between the comfort padding and the EPS. The front of the helmet features two dedicated ports for securely docking sunglasses while resting or climbing. The design reflects the purpose - to adapt to various uses and environments. Widely open, deeper coverage, a versatile visor, and a full polycarbonate wrap that makes it more durable by avoiding exposure of EPS surfaces to outdoor conditions. - In-mold polycarbonate shell with EPS liner - Full polycarbonate wrapped EPS liner to enhance durability - Extended head coverage for more thorough skull protection - MIPS-C2 Brain Protection System add protection in case of certain impacts - MET Safe-T Upsilon Fit System - 360° head belt and vertical adjustments offer a customized fit - Air Lite straps with adjustable divider maximize aerodynamics and comfort - Sunglass ports to securely dock sunglasses - 26 vents are internally engineered for air channeling to improve ventilation and comfort - Comfort pads are hand-washable - Certifications CE; AS/NZS; US

The MET Terranova MIPS is designed for trail and eMTB riding. The construction and fit are inspired by MET's Roam helmet, guaranteeing optimal comfort. The increased head coverage ensures a higher level of protection around the two most sensitive brain areas: the back and the temples. Featuring the MIPS-C2 brain protection system, the Terranova is able to slide against the head in the case of a crash, redirecting damaging rotational motion. The tool-free adjustable visor is injection-molded to flex and bend when there is an impact against it. This unique feature helps to manage extra rotational forces transferred to your neck in a crash. The Terranova MIPS also features two dedicated ports to securely dock sunglasses while climbing or resting. The 360° head belt in the MET Safe-T DUO retention system ensures that there will be no pressure points on the skull and makes the helmet perfectly stable on the head while riding on rugged terrains. - In-mold polycarbonate shell with EPS liner - Fully polycarbonate wrapped EPS liner enhances durability - Extended head coverage for more thorough head protection - MIPS-C2 Brain Protection System offers extra protection in the case of certain impacts - MET Safe-T DUO Fit System - The 360° head belt with vertical adjustments allow for a customized fit - The injection-molded visor is adjustable and flexible to avoid extra rotation of the neck in case of a crash - Sunglass ports to securely dock sunglasses when climbing or resting - Exceptionally comfortable and secure on the head thanks to refined internal shape - 17 vents are internally engineered for air channeling to improve ventilation and comfort - Certifications CE; AS/NZS; US Sizing: - Small/Medium = 52 – 56cm - Medium/Large = 56 – 58cm - Large/X-Large = 58 – 61cm

The Veleno MIPS is the most versatile helmet in the MET range, giving the rider access to the entire world of cycling in one go thanks to its variety of features. Featuring the MIPS-C2 brain protection system, the MET Veleno MIPS is able to slide against the head in the case of a crash, redirecting damaging rotational motion. MIPS is a brain protection system—engineered to add protection to the standard construction of helmets in case of certain impacts. The MIPS Brain Protection System (BPS) is attached inside the helmet, between the comfort padding and the EPS. The visor is minimal and removable thanks to invisible anchor clips that keep the design clean and stylish in both modes. The Veleno MIPS comes with 26 air vents and finely engineered internal air channeling to maximize the airflow. It also features two dedicated ports for securely docking sunglasses while resting or climbing. The 360° head belt of the MET Safe-T Upsilon retention system ensures that there will be no pressure points on the skull and its internal shape is comfortable for almost all different shaped heads. - In-mold polycarbonate shell with EPS liner - Fully polycarbonate wrapped EPS liner enhances durability - Extended head coverage for more thorough head protection - MIPS-C2 Brain Protection System offers extra protection in the case of certain impacts - MET Safe-T Upsilon Fit System - The 360° head belt with vertical adjustments allow for a customized fit - The removable visor with hidden anchors ensures maximum versatility - Air Lite straps with an adjustable divider provide a comfortable and customized fit - 26 vents are internally engineered for air channeling to improve ventilation and comfort - Sunglass ports to securely dock sunglasses when climbing or resting - Certifications CE; AS/NZS; US Sizing: - Small = 52 – 56cm - Medium = 56 – 58cm - Large = 58 – 61cm

Performance-Focused Open-Face Trail Helmet The Speedframe Pro Helmet has earned Virginia Tech's best rating (5 STARS) in its Bicycle Helmet Ratings program. Designed with input from our pro mountain bike athletes, this top-tier open-face trail helmet offers a market-leading feature set including MIPS, an easily adjustable multi-position visor, and a 360-degree fit system. The pro version is equipped with a Varizorb dual-density EPS liner, Fidlock SNAP helmet buckle, and an XT2 antimicrobial comfort liner. Features - Proven MIPS impact protection system reduces rotational forces in a crash - Varizorb Dual-density Varizorb EPS - Fidlock SNAP helmet buckle provides quick and secure entry and exit while wearing gloves - Removable, washable XT2 liner is antimicrobial and manages odor while wicking moisture away from the head - Optimized venting with channeled, in-molded EPS provides efficient cooling - Goggle compatible, 3-position adjustable visor - 360 Fit System allows you to dial in your perfect fit every ride - Weight: 380g Sizing - Small = 51 – 55cm - Medium = 55 – 59cm - Large = 59 – 63cm Certifications - CPSC - EN 1078 - AS/NZS 2063

The combination of innovative design, the latest technology, outstanding functionality, maximum ventilation, and low weight make the Aventor a real allrounder. The Aventor is the perfect helmet for cyclists who need a cool head for riding in high temperatures and on challenging stages. - Double shell, in-mold construction for durable fusion of the outer shell with the shock-absorbing helmet material (EPS) - Lower edge protection provides the helmet with additional protection coverage - ActiCage, structural reinforcement integrated into the EPS, optimizes stability - Zoom Ace, fine adjustment system with handy dial provides a personalized fit - Half-surrounding plastic ring connected to adjustment system - Ponytail compatible - Fidlock magnetic strap buckle Sizing: - Small: 51 – 55cm - Medium: 54 – 58cm - Large: 57 – 61cm

The Sphere MIPS delivers a perfect combination of great looks, all day comfort, performance and features to help protect in the event of an impact. You will look forward to every ride in the Lazer Sphere MIPS helmet. The ARS Fit System enables progressive fit adjustment via a thumbwheel. It distributes pressure evenly around the head, eliminating hot spots and pressure points. The adjustable head basket is ponytail friendly. Eighteen vents orientated at a 15-degree angle assures maximum airflow when the helmet is in the riding position. MIPS protection helps reduce the risk of rotational injury. A polycarbonate layer built inside the helmet keeps the foam together in the event of a crash, offering better protection from successive impacts. Sphere MIPS has been awarded the 5-Star "Best Available" protection rating from Virginia Tech. A docking area makes eyewear storage easy and bottom-shell protection helps prevent damage to the helmet foam. The optional Aeroshell accessory protects against the helmets or offers an aerodynamic benefit when desired. The Sphere MIPS weighs just 280 grams. WEIGHT: 280g (size small) MATERIAL: EPS Foam, Polycarbonate, Nylon FIT SYSTEM: Advanced Rollsys System (ARS) VENTILATION: 18 ROTATIONAL PROTECTION: MIPS CERTIFICATION: CPSC ACCESSORIES: Optional Aeroshell Sizing: - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 61cm Features: Lazer Aeroshell compatible Multi use polycarbonate cover which fits over top of your helmet. It covers the front and side vents to protect your head from rain and cold or to gain an aerodynamic advantage. Adjustable Head Basket Allows the back part of the retention system to be adjusted up and down depending upon your preference and comfort. The nylon ratchet system can be pushed high and out of the way, or low for a feeling of increased security. Advanced Rollsys System (ARS) Easily adjust your helmet's fit by using the thumbwheel on the top of the helmet. Lazer's unique fit system prevents hotspots or pressure points by making the adjustment around the entire circumference of the head. MIPS layer The Multi-Directional Impact Protection System (MIPS) helps reduce the risk of rotational brain injury by isolating your head from the rotation of the helmet shell in the event of an impact. 5-star protection rating The Virginia Tech impact testing uses the STAR evaluation system to determine the helmet's ability to reduce linear acceleration and rotational velocity of the head resulting from a range of impacts a cyclist might experience. 5-star indicates the "Best Available" rating possible. Virginia Tech recommends the use of any 4- or 5-star rated helmet. Well ventilated Carefully designed vents and internal channeling pull air into the helmet and across your head for increased airflow. Essential for performance and comfort during high temperatures and hard efforts.

Pedal-friendly, pro-level impact coverage. Designed for gravity-fueled riding with input from Dakine team riders, these mountain bike knee pads are designed to articulate while you pedal, so they stay in place as you ride. A skid plate and foam padding combo disperse impact loads, while the breathable build keeps the air flowing to keep you dry and comfortable. They are remarkably lightweight to boot.

Its compact shape offers deep, confident coverage, and the Roc Loc Air fit system boosts ventilation while improving fit. In addition to this helmet's already impressive cooling power, it's outfitted with a plush antimicrobial brow pad that helps keep you comfortable and focused on the trail. The Montaro Mips® has been designed to have full goggle integration, with strap grippers on the back of the helmet, and a P.O.V. Plus visor that allows you to lift the visor and place your goggles on the front of the helmet. Another great feature - the breakaway camera mount integration, a clever interface for your favorite light or camera. Roll Cage reinforcement Full goggle integration with strap grippers P.O.V. Plus visor 16 vents with internal channeling Roc Loc 5 Air 370g (size Medium CPSC, CE) Full camera-mount integration with breakaway feature Complies with the US CPSC Safety Standard for Bicycle Helmet for Persons Age 5 and Older E.U.: CE EN1078 Full goggle integration with strap grippers Ionic+™ anti-microbial padding

Leading features plus graphic options that coordinate with the Giro Women's Road Collection make the Ember MIPS the pinnacle of style on the road. The Ember MIPS helmet provides all the features an avid road rider wants in a lightweight package. The design is inspired by the classic aesthetic of our premium Synthe helmet, offering similar performance and style. It features the Roc Loc 5 fit system, which allows you to easily dial-in both fit tension and adjust vertical position with a single hand as well as Air-FX padding for comfort on your longest rides. The Ember MIPS helmet is also equipped with MIPS to redirect impact energy, providing more protection in certain impacts. Specs: - Integrated MIPS - Construction: Thermoformed SL roll cage reinforcement, Compact shape - Ventilation: Wind tunnel vents with internal channeling - Fit System: Roc Loc 5 - Certification: Complies with the US CPSC Safety Standard for bicycle helmet for persons age 5 and older E.U.: CE EN1078 - Highlights: Quick dry padding, Slimline webbing

The Kali Grit Helmet is designed for performance road cycling. It features a Rheon Low-Density Layer (LDL) to protect you in the case of low-G linear or rotational impacts, and Kali's proprietary Supervents to increase overall strength and help with ventilation. The Grit also features the Frequency Fit System, with vertical adjust and dial retention, Fixed Strap Intersections, Unibody Construction and a Rollcage Internal PC Bridge, for added strength. - Rheon Low-Density Layer (LDL) reduces rotational impact forces up to 25% and reduces low-g linear forces up to 30% - Supervent: injection molded skeletal structure for added strength and larger volume intake vents - Frequency Fit System, with dial and vertical adjust offers three positions for maximum comfort and fit - Fixed Strap Intersections: Stops the straps from twisting, while keeping them flush against your face - Unibody Construction: Couples the upper and lower shells for a dialed fit and finish, while adding strength - Rollcage Internal PC Bridge: Used to increases the overall strength of the helmet