Bontrager's LockDown strap dividers are essential for a great fitting, secure helmet. No matter what happens, these original replacements will get them working like new. Key features: - Original replacement strap dividers for your Bontrager helmet - Compatible with all Bontrager helmets equipped with LockDown Straps
• 1-front reflector (steerer tube mount) • Bracket
• Rear reflector (25.4 clamp mount) • Bracket
- Eady to install - Spoke mounted - 2 per set
Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new. New pads can also help you dial in your perfect fit - keeping you comfortable and looking forward to the next ride. - Original equipment replacement fit pads for your Bontrager Dipper helmet - Helmet fit pads should be replaced once a year to maintain fit and hygiene
The Jandd Reflector Mount allows riders to attach a reflector to a rack.
Lose your kid's Baby Nutty Helmet pads? Or did they just get a little too much loving? Replacement pad sets for your Baby Nutty helmet. Each set comes with two of: - 3mm pads (front and rear) - 6mm pads (front and rear) - 6mm crown pad
- Made in the USA - Enables Take a Look Original Eyeglass Mirror to fit helmets - Does not work with Take a Look Compact Eyeglass Mirror
No two heads are exactly the same. Give your Nutcase Gen3 Street helmet an exact custom fit with removable and versatile foam pads in three different sizing sets. Comes in 3mm, 6mm, and 9mm thicknesses. Crown pad is 3mm thick. Please note: This pad set is meant as a replacement for worn out pads, and does not need to be purchased with new helmets. All Gen3 Small & Medium helmets come with one set of 3mm & one set of 6mm pads; Large comes with those two sets and the additional 9mm back pad.
To protect against bright sunlight and light rain, the Nutcase removable visor shades, shields and protects. Made from soft flexible rubber with a hard rubber fin that fits between the ABS plastic outer shell and EPS foam liner, the visor is perfect for unpredictable weather and sunny days alike. Visors are compatible with Street and Little Nutty helmets only, and will not fit with Metroride, Baby Nutty, Moto, Snow, or Water.
These covers are key to keeping your Ballista helmet aero and cool. No matter what happens, these original replacements will get them working and looking like new. - Works perfectly with your Bontrager Ballista helmet - Original equipment replacement vent covers
Helmet buckles work hard to keep your helmets secure and to maximize safety. No matter what happens, these original replacements will get them working like new. Key features - Original replacement buckles for your Bontrager helmet - Compatible with all Bontrager helmets
Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.
• Front reflector (white) • Rear reflector (red)
Give yourself 360 degrees of visibility with Sunlite's Sport Helmet Mirror. It mounts to either your glasses or to your helmet and has a fully adjustable arm for maximum viewing angle.
• 1-Super bright LED • 2 modes (steady / flashing) • 150 hour run time • Water resistant • Multi-fit QR handlebar bracket • Includes (CR 2025) lithium battery
• 2 bright Red LEDs • Includes 2 (CR 2032) lithium batteries • 100 hour run time • 3 mode (2 flashing modes & steady mode) • Water resistant silicone body
Just like the Wide Ankle Strap, but in a more svelte package that keeps your pant leg from being chewed up in your chain. Keep your pants clean, strap together your skis, or use it to secure gear to your pack. Materials: - Upcycled Bicycle Inner Tubes - Hook & Loop - Dimensions: 16 L x 1 H x 0.25 D in./406 x 25 x 6 mm - Weight: 1.2 oz./34 g Features: - Fully adjustable hook & loop closure - Reflective strip for nighttime visibility - Built in Colorado - Made in the USA - Limited Lifetime Warranty
Break or crack a Mirrycle mirror without ruining the mounting hardware? This replacement mirror is just the ticket!
The Wide Ankle Strap is made from upcycled bicycle inner tubes. Keep your pants clean, strap together your skis, roll up your yoga mat, or use it to secure gear to your pack. This incredible strap has a multitude of uses. - Materials: Upcycled Bicycle Inner Tubes and Hook & Loop - Dimensions: 2 H x 16 W x 0.25 D in. (50.8 x 406.4 x 6.35 mm) - Weight: 1.6 oz. (45 g) Features: - Fully adjustable hook & loop closure - Reflective strip for nighttime visibility - Built in USA
For the serious commuter, nothing beats the Jandd Ankle Strap. - Made from 1.5" hook-and-loop material - Meets SCUBA industry wet-strength requirements
Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell and fit just like it did when it was new. Key features - Original equipment replacement fit pads for Bontrager Dipper MIPS helmets - Not compatible with non-MIPS Bontrager Dipper helmets - Helmet fit pads should be replaced once per year to maintain fit and hygiene
Sunlite's CE-1 Bar End Mirror offers a nice, wide and clear view of what's behind so you can ride more safely. It quickly and easily attaches to virtually any handlebar configuration. And, it's light and fully adjustable.
• Front reflector (white) • Rear reflector (red) • Two wheel reflectors (white) w/spoke attachments
Sunlite's HL-K100 Headlight is a great light at a great price. It sports a super-bright Krypton bulb housed in a tough, water-resistant body so it's perfect for commuting year round. A no-tools-required quick-release handlebar mount is included, too.
• 2 wheel reflectors • 2 Brackets • 1-front reflector (steerer tube mount) • 1-rear reflector (25.4 clamp mount)
Sunlite's Round Mirror offers a nice, wide and clear view of what's behind so that you can ride more safely. It quickly and easily attaches to virtually any handlebar configuration. It's light and fully adjustable, and a reflector on the backside adds even more safety.
• 180 hour run time • Includes one 2032 button cell battery • 4-Super bright LED`s • Multi-fit QR seat post mount • 2 mode (steady / flashing) • ROHS Certified • Water resistant
- 32 lumen single LED safety light - 2 modes - steady and flashing - 2 CR2032 batteries included - Water resistant design
- 8 lumen, single LED safety light - 2 modes - solid and flashing - Up to 110 hour run time with 2 CR2032 batteries (included) - Multi-fit rubber strap attachment
Page 1 of 34 Next page